Panasonic AJ-PX270 Operating Instructions Manual

Also see for AJ-PX270: Settings guide Quick guide Specifications Operating instructions Operating instructions

Contents

Panasonic AJ-PX270 Operating Instructions Manual Manual pdf 79 page image

– 79 –Chapter 4 Shooting — Dual codec recordingDual codec recordingRecording in different formats for main recording and sub recording can be performed on the camera.For sub recording, you can select HD proxy in AVC-LongG 6 format with 1920×1080 resolution or one of three SD proxies with different resolution.The file format is MOV that is suitable for nonlinear editing.For the combination with the main recording, refer to “System modes and recording functions” (page 74).Dual codec recording settingSetting menuWhen recording proxy data with the camera, set in the main menu → [RECORDING SETUP] → [DUAL CODEC SETTING].Item Description of settings[REC MEDIA] Selects media for recording proxy data.[P2]: Records proxy data to a P2 card.[P2&SD]: Records proxy data to both of a P2 card and SD memory card.[OFF]: Does not record proxy data.f Factory setting: [OFF][PROXY MODE] Sets the recording mode of proxy data.[LOW 2CH MOV], [HQ 2CH MOV], [SHQ 2CH MOV], [AVC-G6 2CH MOV]f Factory setting: [HQ 2CH MOV][PROXY DISP] Selects whether to display proxy data recorded information or messages in the viewfinder and LCDmonitor.[ON]: Displays proxy recording information and SD memory card remaining capacity at the start ofrecording. Warning information is displayed at all times.[OFF]: Displays proxy and SD memory card warning information for only three seconds when warningoccurs.f Factory setting: [OFF]f For details on relations between dual codec recording and system mode, refer to “System modes and recording functions” (page 74).f When recording proxy data, set [SPLIT] in the main menu → [RECORDING SETUP] → [FILE SPLIT].Checking the setting statusPush the switch on the camera towards the side twice to check the menu values of [REC MEDIA] and [PROXY MODE]with the mode check function.Recording modes and recording signals (video/audio)The following settings are available only when [1080-59.94i] or [1080-50i] is set in the main menu → [SYSTEM MODE] → [LINE&FREQ].r VideoRecording mode File format Resolution Codec Frame rate Bitrate[AVC-G6 2CHMOV]MOV 1920×1080 H.264High Profile60 fps/50 fps 6 Mbps[SHQ 2CH MOV] MOV 960×540 H.264High Profile30 fps/25 fps 3500 kbps[HQ 2CH MOV] MOV 640×360 H.264High Profile30 fps/25 fps 1500 kbps[LOW 2CH MOV] MOV 480×270 H.264Baseline Profile30 fps/25 fps 800 kbpsr AudioRecording mode File format Codec Number of channels Bitrate per channel Sampling frequency[AVC-G6 2CHMOV]MOV AAC-LC 2ch 64 kbps 48 kHz[SHQ 2CH MOV] MOV LPCM 2ch 768 bps 48 kHz[HQ 2CH MOV] MOV AAC-LC 2ch 64 kbps 48 kHz[LOW 2CH MOV] MOV AAC-LC 2ch 64 kbps 48 kHzRecording the proxy dataSelect [P2] or [P2&SD] in the main menu → [RECORDING SETUP] → [DUAL CODEC SETTING] → [REC MEDIA] and press the REC button to startproxy recording at the same time as recording of the sources.Push the switch towards the side twice to display the proxy data recording information on the viewfinder and LCD monitor.Recording to the SD memory cardTo record the proxy data, use SD, SDHC, or SDXC memory cards with an indication of class2 or higher. Refer to our support desk at the followingwebsite for the latest information not included in these operating instructions.http://pro-av.panasonic.net/When recording the proxy data to an SD memory card, always format the card using the camera.