|
– 47 –Chapter 4 Shooting — Adjustable settings when shootingAdjustable settings when shootingAdjust the iris and gain when shooting.Iris1 Switch to manual mode with the switch. (page 44)2 Press the button to switch the adjustment method for the lens aperture.[AUTO IRIS]: Adjusts iris setting automatically. (Auto iris)[MANUAL IRIS]: Adjust the lens iris manually. (Manual iris)3 When on manual iris, rotate the iris ring to adjust the lens iris.When the auto iris level function for auto iris is enabled, the value of the auto iris level can be adjusted by turning the iris ring. The value is notapplied to the setting in the main menu → [SCENE FILE] → [A.IRIS LEVEL EFFECT].@@ NOTEt Auto iris does not function when the frame rate is set to [9fps] or lower in variable frame rate, and when the shutter speed is set to less than 1/12.GainIf the camera recorder screen is dark, increase the gain to brighten the screen.1 Switch to manual mode with the switch. (page 44)2 Switch gain with the switch.: Normally set to this position. (Factory setting is 0 dB): Increases the gain of the camera image amp. (Factory setting is 6 dB): Increases the gain of the camera image amp. (Factory setting is 12 dB)The gain values for , , and can be changed in the main menu → [SW MODE] → [LOW GAIN], [MID GAIN], and [HIGH GAIN].(page 126)When in auto mode, selecting [ON] in the main menu → [AUTO SW] → [AGC] will set the camera to auto gain regardless of the position of the switch. (page 127)@@ NOTEt When [NORMAL] is selected from the main menu → [SYSTEM MODE] → [SHOOTING MODE], the setting of −3 dB does not function.Super gainWhen shooting in dark locations, you can set super gain regardless of whether the camera is in auto mode or manual mode.Select either [24dB], [30dB], [36dB], or [ALL] in the main menu → [SW MODE] → [SUPER GAIN].You can switch to the selected gain by pressing a USER button assigned [SUPER GAIN]. (page 38)When [ALL] is selected, each time the USER button is pressed, the camera toggles [24dB] → [30dB] → [36dB] → normal gain settings in order.@@ NOTEt Super gain does not function when the frame rate is set to lower than [12fps] in variable frame rate, or when the shutter speed is set to lower than1/12.Brightness adjustmentWhen the external light is strong, you can switch the ND filter (brightness adjustment filter) to use with the switch.1 Change the setting of the switch.<1/64>: Reduce the amount of light entering the MOS sensor to 1/64.<1/16>: Reduce the amount of light entering the MOS sensor to 1/16.<1/4>: Reduce the amount of light entering the MOS sensor to 1/4.: Does not use the ND filter.MacroMacro function can be switched [ON]/[OFF].1 Press the USER button to which [FOCUS MACRO] has been assigned.f When [ON] is set, is displayed at the top of the focus display on the viewfinder or LCD monitor.f The operation mode when [ON] is set can be made in the main menu → [SW MODE] → [MACRO MODE].f Focus operation in the tele macro area is disabled when [MACRO MODE] is set to [TELE OFF]. The minimum shooting distance (M.O.D) ismaintained to be 1.1 m even when the zoom position is within the tele macro area.f Focus operation in all macro areas is disabled when [MACRO MODE] is set to [ALL OFF]. The minimum shooting distance (M.O.D) is maintainedto be 1.1 m from the lens at any zoom position.Focusing (manual focus)1 Switch the method of controlling the focus with the switch.: Changes to the auto focus mode. Adjusts the focus automatically.
|
