Panasonic AJ-PX270 Operating Instructions Manual

Also see for AJ-PX270: Settings guide Quick guide Specifications Operating instructions Operating instructions

Contents

Panasonic AJ-PX270 Operating Instructions Manual Manual pdf 135 page image

– 135 –Chapter 6 Menu Operations — Menu listItem Description of settings[DHCP] Sets whether to use automatic acquisition via DHCP when [INFRA] is selected in [TYPE].[ENABLE]: Uses automatic acquisition.[DISABLE]: Does not use automatic acquisition. Set [IP ADDRESS], [SUBNET MASK], [DEFAULTGATEWAY], [PRIMARY DNS], and [SECONDARY DNS].f Factory setting: [ENABLE][IP ADDRESS] Sets the IP address when [DISABLE] is selected in [DHCP].f Factory setting: [192.168.0.1][SUBNET MASK] Sets the subnet mask when [DISABLE] is selected in [DHCP].f Factory setting: [255.255.255.0][DEFAULT GATEWAY] Sets the default gateway when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP].f Factory setting: [192.168.0.254][PRIMARY DNS] Sets the primary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP], orwhen [ENABLE] is selected in [DHCP] and the primary DNS server cannot be obtained.f Factory setting: [0.0.0.0][SECONDARY DNS] Sets the secondary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP],or when [ENABLE] is selected in [DHCP] and the primary DNS server cannot be obtained.f Factory setting: [0.0.0.0][DHCP SERVER] Sets whether to use the DHCP SERVER function when [DIRECT] is selected in [TYPE] and the camera isconnected via wireless LAN.[ENABLE]: Uses the DHCP SERVER function.[DISABLE]: Does not use the DHCP SERVER function.f Factory setting: [ENABLE][NETWORK TOOL] [LOG DISPLAY] Displays the connection log.[STATUS DISPLAY] Displays the network status.[INITIALIZE] Restores the network setting status to the factory settings.[PING] Checks network connection using PING commands.[DISPLAY SETUP]Configure the settings regarding the details to be displayed on the viewfinder or LCD monitor.These menu items cannot be set when the thumbnail screen is displayed.Item Description of settings[MENU DISPLAY] Selects the LCD monitor or the view finder as the location where the menu is displayed.[LCD&EVF]: Displays the menu both on the LCD monitor and the viewfinder.[LCD]: Displays the menu only on the LCD monitor.f Factory setting: [LCD&EVF][ZEBRA1 DETECT] Sets the extraction level of zebra pattern 1.[0%]…[109%]f Factory setting: [70%][ZEBRA2 DETECT] Sets the extraction level of zebra pattern 2.[0%]…[109%]f Factory setting: [85%][ZEBRA2] Sets on/off of zebra pattern 2 and selects the type.[ON], [SPOT], [OFF]f Factory setting: [SPOT][CENTER MARK] Controls the center mark.[1]: + (large)[2]: Open center (large)[3]: + (small)[4]: Open center (small)[OFF]: Does not display.f Factory setting: [1][SAFETY MARK] Selects the type of frame for the safety zone marker.[1]: Box[2]: Corners[OFF]: Does not display.f Factory setting: [2][SAFETY AREA] Sets the size of the safety zone marker.The constant ratio of length to width can be set in 1% increments.[80%]…[100%]f Factory setting: [90%][FRAME MARK] Enables/disables frame marker.[ON], [OFF]f Factory setting: [OFF][FRAME SIG] Sets frame marker aspect ratio.[4:3], [13:9], [14:9], [1.85:1], [2.35:1]f Factory setting: [4:3][FRAME LVL] Sets the level of the outside of the frame marker.[0]…[15]f Factory setting: [15][LEVEL GAUGE] Enables/disables level gauge.[ON], [OFF]f Factory setting: [OFF]