– 150 –Chapter 8 Connecting to External Devices — Connecting with headphones, remote control, or TV/monitorConnecting with headphones, remote control, or TV/monitorHeadphonesHeadphones (optional) can be connected to the headphone terminal (3.5 mm stereo mini jack).Headphone terminal@@ NOTEt When headphones are connected, audio is not output from the speaker.Remote controlRemote control (optional) can be connected to the terminals (, ).When the remote control is connected to the terminal (3.5 mm mini jack), you can remotely control the focus and iris operations.When the remote control is connected to the terminal (2.5 mm super mini jack), you can remotely control the zoom and recording start/stop operations. terminal terminal@@ NOTEt Do not connect a device other than a remote control to the terminals. Connecting a device other than a remote control may changethe brightness or cause defocus of images.TV/monitorA TV or monitor can be connected as shown in the following figure.Audio cable (optional)TV/monitor3.5 mm diameter jack-pin conversion cableBNC cable (optional)BNC cable (optional)HDMI cable (optional)@@ NOTEt VIERA Link is not supported on the camera. Please be aware that when using an HDMI cable and connecting this camera to a device that supportsVIERA Link, the VIERA Link of other devices may not work in some cases.t SD signals (480i, 576i) output from the terminal are converted to progressive signals (480P, 576P) then output.t For the BNC cable (optional) connected to the terminal, prepare a double-shielded cable equivalent to 5C-FB.
