35 (E)CONTENTSSetup menusThe underlined items indicates the initial setting.USER menu No./Item Description000P-ROLL TIMEThis sets the preroll time.The preroll time can be set from 0 to 15 secondsin 1-second increments.0000 0s: :0005 5s: :0015 15s001LOCAL ENAThis selects the buttons which can be operatedon the front panel when the CONTROL switchhas been set to REMOTE.0000 DIS :No buttons can be operated.0001 ST&EJ :Only the STOP and EJECT buttons can beoperated.0002 ENA :AJ-SD955B: All buttons except for theRECORDER and PLAYERbuttons can be operated.AJ-SD930B: All buttons can be operated.002TAPE TIMERThis selects the 12 or 24 hour display for theCTL counter.0000 ±12h : 12 hour display0001 24h : 24 hour display006SYNCHRONIZESD955B This selects whether or not to synchronizebetween two VTRs.0000 OFF :No synchronization. The editing points deviateseveral frames, but editing can be startedquickly.0001 ON :Synchronization. Allows for error-free editing.003REMAIN SELThis selects whether the remaining tape timeand total tape length are to be displayed in thesuperimposed display of the VIDEO OUT 3/SDI OUT 3 connector signals.0000 OFF : No display.0001 2L :The remaining tape time is displayed on thesecond line.0002 1L :The remaining tape time is displayed on thefirst line.0003 R/TTL :The remaining tape time is displayed on thefirst line, and the total tape length is displayedin the second line.OWhen “2L” is selected, the remaining tape timeis not displayed if “TIME” has been selected asthe setup menu item No.008 (DISPLAY SEL)setting.OWhen “R/TTL” is selected, the total tape lengthis not displayed if “TIME” has been selected asthe setup menu item No.008 (DISPLAY SEL)setting.008DISPLAY SELThis selects what information is to beprovided by the time code and other superdisplays output to the VIDEO OUT 3/SDI OUT 3connector.0000 TIME : Data only.(The data indicates the value for whichever ofCTL, TC or UB currently selected by theCOUNTER button.)0001 T&STA : Data and operation status.0002 T&S&M : Data, operation status andmode.0003 T&RT : Data and REC TIME0004 T&YMD :Data and REC DATE (year/month/day)0005 T&MDY :Data and REC DATE (month/day/year)0006 T&DMY :Data and REC DATE (day/month/year)0007 T&UB :Data and user’s bit.However, when UB has been selected with theCOUNTER button, the time code is displayedafter the user’s bit.0008 T&CTL :Data and CTL data.However, when CTL has been selected withthe COUNTER button, the time code isdisplayed after the CTL data.0009 T&T :Data and time code.0010 VITC:The time code and user’s bit recorded in theVAUX area are displayed.OMode display:DVCPRO 50 (50 Mbps) = DVCPRO_50,DVCPRO (25 Mbps) = DVCPRO,DV = DV, DVCAM = DVCAMOAn error message appears if a warning or errorhas occurred when “T&S&M” has beenselected as this setting.OREC TIME and REC DATE are displayedduring DV/DVCAM, playback only. With theDVCPRO50 (50 Mbps) or DVCPRO (25 Mbps)format, the operating mode is displayed.No./Item DescriptionWhen the automatic editingmode [PREVIEW, AUTO EDIT]is set, the unit will not operate ifthe preroll time is set to 0seconds.
