Panasonic AJ-SD930BE Operating Instructions Manual

Also see for AJSD955B - DVCPRO50 STUDIO DECK: Service manual Brochure & specs

6 (E)CONTENTSFront panel1 POWER switch2 Format display areaThe recording format and the format of the tapeinserted in the unit are displayed here.DVCPRO50:This indicates recording and playback ofDVCPRO50 (50 Mbps) format tapes.DVCPRO:This indicates recording and playback ofDVCPRO (25 Mbps) format tapes.DV:This indicates playback of DV format tapes.3 Cassette insertion slot4 EJECT buttonWhen this button is pressed, the tape is unloadedand the cassette is ejected automatically a fewseconds later.When CTL display has been selected for thecounter display, the display is reset.EJECT button operation can be enabled or disabledwith setup menu No. 115 (EJECT SW INH).5 INPUT SELECT buttonsThese buttons switch the video and audio inputsignals. It is also possible to switch the input signalsto the internal reference signal selected on setupmenu No. 600 (INT SG).VIDEO:Each time the VIDEO button is pressed, the inputvideo signal selection is switched in the order ofY PB PR 5 CMPST 5 SDI 5 SDTI/1394 5 SG(SG/SG1/SG2).O When SG has been selected, the signal isswitched to the internal reference signalselected on setup menu No. 600 (INT SG).AUDIO:Each time the AUDIO button is pressed, theinput audio signal selection is switched in theorder of ANALOG 5 AES/EBU 5 USER SET 5SDI 5 SDTI/1394 5 SG.O USER SET is a function which enables theinput signals to be selected and recordedseparately on PCM audio signal channels 1through 4, and is used in conjunction with thesetup menu.Example:O It is possible to inhibit input switching operations(video and audio) of the INPUT SELECT buttonswith setup menu No. 112 (V IN SEL INH) andNo. 113 (A IN SEL INH).O Y PB PR, CMPST and SDTI/1394 cannot beselected unless one of the optional boards (AJ-YA932G, AJ-YAC930G) has been installed.SettingsAUDIO buttonUSER SETSetup menusNo.715 (CH1 IN SEL) : ANANo.716 (CH2 IN SEL) : DIGINo.717 (CH3 IN SEL) : DIGINo.718 (CH4 IN SEL) : ANANo.719 (D IN SEL12) : AESNo.720 (D IN SEL34) : SIFPCM audio signals to be recorded on the tapeCH1 : Analogue input signalsCH2 : AES/EBU digital signalsCH3 : SDI input digital signalsCH4 : Analogue input signalsParts and their functionsONOFFPOWERDVDVCPRODVCPRO 50METERLRFULL/FINEMONITOR SELECTHEADPHONESMONITORMIXA VOLSELECTINPUT SELECTPREVIEW/PREVIEWAUTO EDITPREROLLVIDEOREC LEVELCH1PB LEVELAUDIOCH2 CH3 CH4 TCPRESETMENU SET DIAGSUPER REC INHINT TCGMODECONTROLONOFFUNITYVARCOUNTERRESETA INTRIMSETOUTINA OUTCH1 CH4CH2INSERTCH3ASSEM VIDEO CUE TC STAND BYEDITREW STOPPLAY RECPLAYER RECORDERFFJOG SHTL SLOWTAPEEEONREGENPRESETEXITOFFREMOTELOCAL1 2 3 45