Panasonic AJ-SD930BE Operating Instructions Manual

Also see for AJSD955B - DVCPRO50 STUDIO DECK: Service manual Brochure & specs

46 (E)CONTENTSSetup menusThe underlined items indicates the initial setting.USER menu

No./Item Description No./Item Description600INT SGThis selects the internal reference signal.0001 BB :The black burst is generated.0002 CB100 :100% colour bars are generated.0003 CB75 :75% colour bars are generated.601OUT VSYNCThis selects whether to float the vertical syncposition of the video output in order to alignthe video output phase with the input in theEE/record/edit modes.0000 N-VF : Signals are not floated.0001 VF : Signals are floated.602V-MUTE SELThis selects whether to mute the video outputsignals when a blank on the tape has beendetected during playback.0000 N-MUTE : No muting. (Freeze)0001 LOW RF : Muting. (Set to gray.)606OUT C KILLThis selects chroma colour killer processingfor the video output signals.0000 B/W : No colour signals are output.0001 COLOR : Colour signals are output.609EDHThis selects whether to superimpose EDHonto the SDI output signals.0000 OFF : EDH is not superimposed.0001 ON : EDH is superimposed.Even when ON is selected for this setting, EDH isnot superimposed onto the signals output fromthe SDI OUT 3 connector if the SUPER switch onthe front panel of the unit is set to ON.611YC SEP MODEThis selects Y/C separation processing forthe composite input signals.0000 B/W :The signals are processed as B/W signals.0001 AUTO :The signals are automatically detected.When no optional board (AJ-YA932G) has beeninstalled, setup menu No. 611 is not displayed.618INTERPOLATEThis selects the interpolation operation.Vertical interpolation is conducted automaticallyduring slow-motion playback to reduce thevertical movement of the playback pictures.However, this menu item enables theinterpolation operation to be forcibly turned off.0000 OFF :Interpolation is forcibly turned off.0001 AUTO :Interpolation is automatically turned on duringslow-motion playback.605FREEZE SELThis selects the freeze mode for still pictures.0000 FIELD : Field freeze.0001 FRAME : Frame freeze.When frame freeze has been selected, the frameslow status is established with the slow setting.614PB/P R OUT LVSD955B This selects the analog component outputlevel.0000 M II : M II level0001 B-CAM : ß-CAM levelThis setup menu is not displayed in the 625isystem.610PB/P R IN LVSD955B This selects the analog component inputlevel.0000 M II : M II level0001 B-CAM : ß-CAM levelOThis setup menu is not displayed in the 625isystem.OWhen no optional board (AJ-YA931G) hasbeen installed, setup menu No. 610 is notdisplayed.603CC (F1)BLANKSD955B This selects ON or OFF for the closed captionsignal of the first field.0000 BLANK : Signal is forcibly blanked.0001 THRU : Signal is not blanked.This setup menu is not displayed in the 625isystem.604CC (F2)BLANKSD955B This selects ON or OFF for the closed captionsignal of the second field.0000 BLANK : Signal is forcibly blanked.0001 THRU : Signal is not blanked.This setup menu is not displayed in the 625isystem.