44 (E)CONTENTSSetup menusThe underlined items indicates the initial setting.USER menuNo./ItemDescription506BINARY GPThis sets the usage status of the user bit ofthe time code generated by the TCG.0000000:NOT SPECIFIED (character set not specified)0001001:ISO CHARACTER (8 bits character set basedon ISO646, ISO2022)0002010:UNASSIGNED 1 (undefined)0003011:UNASSIGNED 2 (undefined)0004100:UNASSIGNED 3 (undefined)0005101:PAGE/LINE0006110:UNASSIGNED 4 (undefined)0007111:UNASSIGNED 5 (undefined)507PHASE CORRThis selects whether to control the phasecorrection of the LTC which is output fromthe TIME CODE OUT connector.0000OFF:Phase correction control is not performed.0001ON:Phase correction control is performed.508TCG CF FLAGThis selects whether the CF flag of the TCG isto ON.0000OFF:CF flag is OFF.0001ON:CF flag is ON.510TC OUT REFThis is used to switch the phase of the timecode, which is output from the TIME CODEOUT connector, for the external LTC inputwhen the TCG switch is at the EXT position.0000V OUT:Time code is synchronized with output videosignal.0001TC_IN:Time code is synchronized with external timecode input.No./ItemDescription500VITC BLANKFor selecting whether to output the VITCsignal at the positions selected by setupmenu items No. 501 (VITC POS-1) and No. 502(VITC POS-2).0000BLANK:VITC signals are not output.0001THRU:VITC signals are output.501VITC POS-1This sets the position where the VITC signalis to be inserted.[625i system][525i system]00007L000010L::::000411L000616L::::001522L001020LThe same line as the one used for the setupmenu items No. 502 (VITC POS-2) and No. 662(UMID POS) setting cannot be set.SD955B503TCG REGENThis selects the signal to be regeneratedwhen the time code generator (TCG) in theREGEN mode.0000TC&UB:Boththetimecodeanduserbitareregenerated.0001TC:Only the time code is regenerated.0002UB:Only the user bit is regenerated.504REGEN MODEThis selects whether the time code is to beregenerated during automatic editing usingthe unit’s control panel.0000AS&IN:Time code is regenerated with assemble orinsert editing.0001ASSEM:Timecodeisregeneratedwithassembleediting.0002INSRT:Time code is regenerated with insert editing.0003SW:Setting complies with TCG switch setting.505EXT TC SELThis selects the time code to be used whenan external time code is to be used.0000LTC:The LTC of the TIME CODE IN connector isused.0001VITC:The VITC of the input video signal is used.502VITC POS-2This sets the position where the VITC signalis to be inserted.[625i system][525i system]00007L000010L::::000613L000818L::::001522L001020LThe same line as the one used for the setupmenu items No. 501 (VITC POS-1) and No. 662(UMID POS) setting cannot be set.SD955B509DF MODESD955BThis selects the DF or NDF mode for CTL andTCG.0000DF:The drop frame mode is used.0001NDF:Thenon-dropframemodeisused.ODropframemodeisvalidonlywhentheCONTROL switch is set to LOCAL or the setupmenu No. 001 (LOCAL ENA) is set to ENA.OThis setup menu is not displayed in the 625isystem.