Panasonic AJ-UFC1800 System Reference Manual

Also see for AJUFC1800 - HD STANDARDS CONVERT: Operating instructions

10OperationBasic operationVIDEO IN Press VIDEO IN to select the input format and frame rate.FORMAT Press FORMAT(F1) to select an HxV value. Pressing the function key or turning theknob will cycle through the range of choices. AUTO SD or AUTO HD will attempt todetect the input format if a signal is present.F RATE Press F RATE(F2) to select the frame rate. Pressing the function key or turning the knobwill cycle through the range of choices. AUTO SD or AUTO HD will attempt to detect theinput format if a signal is present.VIDEO OUT Press VIDEO OUT to select the output format and frame rate.FORMAT Press FORMAT(F1) to select an HxV value. Pressing the function key or turning theknob will cycle through the range of choices.F RATE Press F RATE(F2) to select the frame rate. Pressing the function key or turning the knobwill cycle through the range of choices.This will set the system to nominal conversion settings. These settings can be modified under thefollowing menus.FILTER Press FILTER to change the conversion filters and to add enhancement.H RESP Press H RESP(F1) to select a horizontal filter response. Pressing the function key orturning the knob will cycle through the NARROW, STANDARD and WIDE choices.V RESP Press V RESP(F2) to select a vertical filter response. Pressing the function key orturning the knob will cycle through the NARROW, STANDARD and WIDE choices.H ENH Press H ENH(F3) to add horizontal enhancement. Pressing the function key or turningthe knob will change the amount in 0.5dB steps.V ENH Press V ENH(F4) to add vertical enhancement. Pressing the function key or turning theknob will change the amount in 0.5dB steps.2-D ENH Press 2-D ENH(F5) to add both horizontal and vertical enhancement at the edge of theband. Pressing the function key or turning the knob will change the amount in 1dB steps.This control may have limited effect on upconverted signals.RESIZE Press RESIZE to change the zoom, pan or crop settings. Press EXIT or turn the knobuntil ZOOM/PAN is displayed. The double arrow “>>” signifies that multiple menus areavailable at this level.ZM MODE Press ZM MODE(F1) and select VARIABLE.