Panasonic AJ-UFC1800 System Reference Manual

Also see for AJUFC1800 - HD STANDARDS CONVERT: Operating instructions

24TIME CODE-INPUTThis menu allows the user to select the source for LTC and indicate drop frame or non-drop frame TC.S E T U P > T I M E C O D E - I N P U TS O U R C E D F M O D EF1 F2 F3 F4 F5 EXITF1 – Selects whether the time code source is from the serial input or from the external TC connector (S_LTC,EXT_LTC or S_VITC).F2 – When this is on AUTO, the time code source drop frame flag is used. Otherwise, non-drop frame mode is set(AUTO, OFF).Note: When an SD input is selected, S_LTC cannot be selected.TIME CODE-OUTPUTThis menu allows the user to select the source for SD_VITC and indicate drop frame or non-drop frame TC. For anHDTV output, the following menu is seen.S E T U P > T I M E C O D E - O U T P U TE X T L T C S V I T C S L T C D F M O D EF1 F2 F3 F4 F5 EXITF1 – Selects whether the external LTC is on or off.F2 – Selects whether the SDI output VITC is on or off.F2 – Selects whether the SDI output LTC is on or off.F4 – Selects between drop frame mode and non-drop frame mode.Note: If the input TC source is not available, then the TC output selections will be forced to the off setting until thesource is present.For an SDTV output, the following menu is seen.S E T U P > T I M E C O D E - O U T P U TE X T L T C S V I T C V I T C 1 V I T C 2 D F M O D EF1 F2 F3 F4 F5 EXITF1 – Selects whether the external LTC is on or off.F2 – Selects whether the SDI output VITC is on or off.F3 – Activates knob to select the line for VITC1 insertion on SD outputs.F4 – Activates knob to select the line for VITC2 insertion on SD outputs.F5 – Selects between drop frame mode and non-drop frame mode.Note: If the input TC source is not available, then the TC output selections will be forced to the off setting until thesource is present.