Panasonic AJ-UFC1800 System Reference Manual

Also see for AJUFC1800 - HD STANDARDS CONVERT: Operating instructions

17Video In MenusThe VIDEO IN menus are activated by pushing the VIDEO IN button on the UFC front panel. These menus allowthe user to select the input video format for the system. The format, and frame rate, are selected independently, withthe system providing feedback to the user if the format & frame rate selected are not compatible. These menus alsoallow the user to select film processing modes and to select the source of the 3:2 reference. Pull-down mode selectsthe frame processing that will be performed by the system: either none, 2:2 pull-down, or 3:2 pull-down. For 3:2pull-down cases, a reference must be provided to signal the start of a 5 frame, 3:2 sequence. This reference maycome from time code, SMPTE 318 black burst with frame flags or can be manually set.VIDEO INIf SD or HD auto detect mode is selected, then the related SDI input is monitored for format information. If a validformat is detected, then the system is configured for that particular formatV I D E O I NF O R M A T : 1 9 2 0 X 1 0 8 0 i 3 0 H zF O R M A T F R A T E P U L L D NF1 F2 F3 F4 F5 EXITF1 – Activates knob to select an input video format (e.g., AUTO HD, 1920x1080I, 1280x720P).F2 – Activates knob to select an input frame rate (AUTO HD, AUTO SD, 60, 59.94, 50, 48, 47.95, 30, 29.97, 25,24, 23.98).F3 – Activates knob to select the 2:2 or 3:2 pull-down frame processing mode for input (OFF, 2:2 or 3:2).VIDEO IN (auto format mode)V I D E O I NF O R M A T : A U T O H Dd e t e c t e d m o d e : 1 9 2 0 x 1 0 8 0 i / 3 0 H zF O R M A T F R A T E P U L L D NF1 F2 F3 F4 F5 EXITNote: Function keys operate the same as above.Video Out MenuThe VIDEO OUT menu is activated by pushing the VIDEO OUT button on the UFC front panel. This menu allowsthe user to select the output video format for the system. The format and frame rate are selected independently, withthe system providing feedback to the user if the format & frame rate selected are not compatible. The output framerate must also match the input frame rate; either matching exactly, or related through 2:2 or 3:2 pull-down (forexample: if the input frame rate is 60, the output may be 60, 30, or 24).V I D E O O U TF O R M A T : 1 9 2 0 X 1 0 8 0 i 2 4 H zF O R M A T F R A T E F L D / F R MF1 F2 F3 F4 F5 EXITF1 – Activates knob to select an output video format (e.g., 1920x1080I, 1280x720P).F2 – Activates knob to select an output frame rate (60, 59.94, 50, 48, 47.95, 30, 29.97, 25, 24, 23.98).F3 – Selects either field or frame filtering for 2:2 or 3:2 film outputs. This selection only appears when it isappropriate.