Panasonic AJ-UFC1800 System Reference Manual

Also see for AJUFC1800 - HD STANDARDS CONVERT: Operating instructions

11ZOOM H,V Press ZOOM H(F2) and ZOOM V(F3) to change the zoom factor. This will lock thehorizontal and vertical adjustments together. Turn the knob to set the desired size.EXIT Press EXIT to go to the CROP menu.L, R, T, B Press LEFT(F1), RIGHT(F2), TOP(F3) or BOTTOM(F4) to remove portions of the inputframe. Small adjustments can be made by successively pushing the function keys or theknob can be used to easily cover the full range of control.EXIT Press EXIT to view the resizing PRESETS menu. F1-5 are shortcut keys to selectpopular picture sizes such as letterbox and 14x9.If the output image does not completely cover the output frame, a black background will be displayed.To change the background color, go to the SET UP menu.SET UP Press SET UP and then press EXIT or turn the knob until BACKGROUND COLOR isdisplayed. The double arrow “>>” signifies that multiple menus are available at this level.BG COL Press BG COL(F1) to select a predefined color or select CUSTOM and then use F3-5 toset the RGB values.Film mode operationFor 24Hz progressive input:VIDEO IN Press VIDEO IN to select the input format and 24Hz frame rate.FORMAT Press FORMAT(F1) to select an HxV progressive value. Pressing the function key orturning the knob will cycle through the range of choices.F RATE Press F RATE(F2) to select a 23.98/24Hz frame rate. Pressing the function key orturning the knob will cycle through the range of choices.VIDEO OUT Press VIDEO OUT to select the output format and frame rate. 24, 30, 48 and 60Hz ratesare all possible.FORMAT Press FORMAT(F1) to select an HxV value. Pressing the function key or turning theknob will cycle through the range of choices.F RATE Press F RATE(F2) to select the frame rate. Pressing the function key or turning the knobwill cycle through the range of choices. If a 29.97/30Hz or 59.94/60Hz rate is chosen,then a 3:2 sequence is inserted. The sequence will be A Frame aligned with one hourtime code values whenever possible.FLD/FRM Press FLD/FRM(F3) to select field or frame filtering for 23.98/24Hz interlaced orsegmented frame outputs.