1274. Input/output signal settings4-8-4. Changing the material namesChange the names of the INPUT1 to 20 materials that are to be set on the multi view display.The default settings, preset settings or user settings can be selected for these names.When the preset settings and user settings are established, the material name (CAM1, etc.) display format isused.INPUT XX|Name |Type↓ | || 3/13 |Defalt| |PresetUserPress the [INPUT] button to light its indicator anddisplay the INPUT menu. Refer to “2-1-5. LCD menu area”.Turn [F1] to display the INPUT XX sub menu.(X: IN1 to IN16, A1, A2, B1 or B2)The signal with the material whose name is to bechanged is selected for X.Turn [F2] to display the Name sub menu.Turn [F3] to select the type of material name using the Type item, and press the [F3] switch to enter the type.An asterisk () appears at the left of the type of material name currently selected.Defalt: The default settings for INPUT1 to INPUT16, INPUTA1, INPUTA2, INPUTB1 and INPUTB2 areselected.Preset: The material names and number provided ahead of time are selected.User: The material names are set using 7 characters.If the Type item setting is changed when “Preset” or “User” is selected, the previously provided materialnames will be lost.Preset type setting procedureOn the Name sub menu, turn [F3] to select “Preset”using the Type item.Turn [F4] to select the material name using theName item.Turn [F5] to select the material number using theNO. item, and press the [F5] switch to enter thenumber.INPUT XX|Name |Type↓ |Name |NO.()↓| 3/13 |Preset| CAM| 1CCGCGVCGKPCVVTRVCR1~9User type setting procedureINPUT XX|Name |Type↓ |Name | (■)↓| 3/13 | User| ■AM8| COn the Name sub menu, turn [F3] to select “User”using the Type item.Turn [F4] to move the “” cursor to the position ofthe character to be changed using the Name item.Turn [F5] to select the character, and press the [F5]switch to enter it.Set all the characters in the material name byrepeating steps and .
