443. Basic operations3-3-5. Setting the wipe start positionAny start position can be set for WIPE patterns No.5 and No.11 and for SQ pattern No.5 among the wipe patterns.For WIPE patterns No.5 and No.11, the position is set using the WIPEPos sub menu of the BKGD menu.For SQ pattern No.5, it is set using the SQPos sub menu of the BKGD menu.Press the [BKGD] button to light its indicator, and display the BKGD menu. Refer to “2-1-5. LCD menu area”.Turn [F1] to display the WIPEPos sub menu or the SQPos sub menu.BKGD 3|X-Pos |Y-Pos | |CopyTo↓WIPEPos | 0.00| 0.00| |-100.0|100.0-100.0|100.0BKGD 4|X-Pos |Y-Pos | |CopyTo↓SQPos | 0.00| 0.00| |-100.0|100.0-100.0|100.0Either operate the positioners or turn [F2] and [F3] to set the wipe start position using the X-Pos item andY-Pos item.These settings can be established only when WIPE or SQ #5 has been selected as the background patternor key pattern.Either operate the fader lever or press the [AUTO] button to check the wipe operation.(When, for instance, –50 has been set for X-Pos and –50 for Y-Pos, the following screen (or key) appearsfrom the bottom left and wipe is performed while the screen (or key) moves to the screen center.)Inside screen areaOutside screen areaTo copy the start position settings, press [F5].The copy destination appears under the CopyTo item. (It will not change even if [F5] is turned.)
