1415. System settings5-7-2. Editor controlThe following lists the functions which can be controlled by editing controller AG-A850.(Compliant with the GVG protocol)• Read command• Crosspoint switch• Wipe pattern selection (BKGD)• Transition mode (MIX/WIPE) selection• Auto transition time setting• Auto transition execution
GVGprotocolAV-HS450NGVGprotocolAV-HS450NGVGprotocolAV-HS450NGVGprotocolAV-HS450N1WIPE #122SQ1 #10433D1 #764SL2 #42WIPE #223—443D1 #865—3WIPE #324SQ1 #12453D1 #966SL2 #64WIPE #425SL1 #1463D1 #1067—5WIPE #526SL1 #2473D1 #1168SL2 #86WIPE #627SL1 #3483D1 #1269—7WIPE #728SL1 #449—70—8WIPE #829SL1 #550SQ2 #271—9WIPE #930SL1 #651—72—10WIPE #1031SL1 #752SQ2 #473—11WIPE #1132SL1 #853—74SD2 #212WIPE #1233SL1 #954SQ2 #675—13SQ1 #134—55—76SD2 #414SQ1 #235—56SQ2 #877—15SQ1 #336—57—78SD2 #616SQ1 #4373D1 #158—79—17SQ1 #5383D1 #259—80SD2 #818SQ1 #6393D1 #360—81—19SQ1 #7403D1 #461—82—20SQ1 #8413D1 #562SL2 #283—21SQ1 #9423D1 #663—84—On the RS422 sub menu of the CTL menu, set On or Off for control from the external device (editor) connected tothe RS-422 connector.For details on the settings, see “5-7-1. Enable/Disable Setting for Control of External Devices”.