873. Basic operations3-10-4. Deleting the operations stored in the memory (Delete)1 2 34 5 67 8 910 XPT DSBL EFF DSLVWIPESQ1 SQ2SL2SL13D1 3D2PAGESTORDELUNDOBKGDWIPEMEMRECALLSHOTMEMPinPMEMCAMMEMBKGDPATTKEYPATT1 2435 67 8 910 12MEMORY / PATTERN11Press one of the buttons — [SHOT MEM], [BKGD WIPE MEM], [PinP MEM] or [CAM MEM] — to select thecorresponding memory whose operations are to be deleted.The selected button lights in amber.Depending on the operation that was performed last, the [STOR] button, [RECALL] button or [DEL] buttonlights.Press the [DEL] button.The [DEL] button lights in red.The button of the number key containing the stored operations lights in green (or in amber with the AWsystem). However, it will not light when [CAM MEM] is selected.Hold down (for about 2 seconds) the number key (1 to 10) used to delete the stored operations.The button of the pressed number key goes off.As soon as the stored operations are deleted, the [UNDO] button becomes operable and lights in amber. Ifthe [UNDO] button is pressed while it is lighted, the status before the stored operation was deleted will berestored.The [CAM MEM] button deletes specified preset numbers registered in the pan-tilt heads. When the [CAM MEM] button is selected, the [UNDO] button will have no effect so it will not light.To exit memory delete, press the [DEL] button or [SHOT MEM] button.
