222. Functions in each area2-1-3. User button area User buttons [USER1 to USER6]These are used to assign some functions of the menu settings to the [USER1]to [USER6] buttons on the CONFIG menu. See “5-3-1. Setting the user buttons”.1 2 34 5 6USER2-1-4. Transition area 8 910 XPT DSBL EFF DSLVMIXWIPEONDSK1ONDSK2ONPinP1ONPinP2ONKEYONFTBONN/R RBKGD KEYMIX WIPECUT AUTOUNDO KEYPATT10 12MEMORY / PATTERN11WIPE DIRECTION [BKGD] buttonThis executes the background transition when the [AUTO] button () or fader lever () has been operated.When the [BKGD] button is pressed and it is selected, its indicator lights in amber.If the [KEY] button () is now pressed, the indicator goes off, and the de-selected status is established.When the [BKGD] button and [KEY] button () are pressed at the same time, both buttons are set to theselected status. [KEY] buttonThis executes the key transition when the [AUTO] button () or fader lever () has been operated.When the [KEY] button is pressed and it is selected, its indicator lights in amber.If the [BKGD] button () is now pressed, the indicator goes off, and the de-selected status is established.When the [BKGD] button () and [KEY] button are pressed at the same time, both buttons are set to theselected status. KEY ON tally LEDThis lights in red when the key ON status is established. MIX, WIPE selection status tally LEDsThese light up to indicate whether MIX or WIPE has been selected when background transitions or keytransitions are executed.
