1355. System settings5-3. Button assignments5-3-1. Setting the user buttonsThe user can assign several functions which can be set using the menu items into six user buttons (USER 1 toUSER 6).The user buttons light in amber when the assigned function is ON and are off when the assigned function is OFF.Each time the user button is pressed, the function setting alternates between ON and OFF.The table below lists the functions which can be assigned to the user buttons (USER 1 to USER 6).No. Function name Description of function1 PinPPVW Outputs the PinP1 and PinP2 images to the preview outputs.2 DSK1PVW Output the DSK1 image to the preview output.3 DSK2PVW Output the DSK2 image to the preview output.4 Edit-EN Turns the control of the editor to ON or OFF.5 COM-EN Turns the external control using the COM connector to ON or OFF.6 GPIM-In-EN Enables or disables GPI-In (at the mainframe side)7 GPIM-Out-EN Enables or disables GPI-Out (at the mainframe side)8 GPIP-In-EN Enables or disables GPI-In (at the control panel side)9 GPIP-Out-EN Enables or disables GPI-Out (at the control panel side)10 OSD Turns the on-screen displays on (displayed) or off (not displayed).11 StrFM1 Imports the images of the AUX1 to AUX4 buses, which have been set using the FMEM menu, intothe frame memory (FMEM1).12 StrFM2 Imports the images of the AUX1 to AUX4 buses, which have been set using the FMEM menu, intothe frame memory (FMEM2).13 StrFM3 Imports the images of the AUX1 to AUX4 buses, which have been set using the FMEM menu, intothe frame memory (FMEM3).14 StrFM4 Imports the images of the AUX1 to AUX4 buses, which have been set using the FMEM menu, intothe frame memory (FMEM4).15 SHIFT Switches all the A/B bus and AUX bus crosspoints between front and rear.16 AUX TRAN Enables or disables the AUX transitions.17 NoAsign No assignment
