109Chapter 3: Screen displays and setting menusOTHER FUNCTIONS screenItem Displaymode Description of settingsCARDFORMATCAMERAPHOTODV INPB*1Formats the SD Memory Card.YES: Formats the card.NOFormatting a card will delete all data recorded in AVCHD mode and DV mode.•CARD STATUS(AVCHD modeonly)PB Displays the SD Memory Card status.YES: Displays the card status.NOIR REMOTE CAMERAPHOTODV INPBSets the operations of the supplied remote control unit.ON: Accepts commands from the remote control.OFF: Operations are not accepted from remote control.DV CONTROL(DV modeonly)CAMERA Selects the control method by this camera when a digital device is connected tothe DV terminal and backup images are recorded.OFF: Not controlling any external device.EXT: Controls external devices with the START/STOP button.BOTH: Simultaneously records with this camera and an external device.CHAIN: The external device starts recording automatically when this camera’srecording memory has nearly run out.DV CMD SEL(DV modeonly)CAMERA Sets the recording operation of the external device when the START/STOPbutton is pressed.REC_P: Switches between record and pause.STOP: Switches between record and stop.REC LAMP CAMERAPHOTOSets lighting of the tally lamp.FRONT: Lights the front side tally lamp.REAR: Lights the rear side tally lamp.BOTH: Lights both tally lamps.OFF: Tally lamp lighting is turned off.BEEP SOUND CAMERAPHOTODV INPBTurns the beep sound ON or OFF.ON OFFIf the SD Memory Card becomes FULL while ON is selected, the beep sound isoutput.When the beep is sounded, the audio signals from the output connector aremuted before the beep sound is output.CLOCK SET CAMERAPHOTODV INPBSets the camera-recorder’s calendar.YES NOindicates the factory setting.* 1 AVCHD mode only
