81Chapter 2: Operations in DV modeThumbnail operationsThumbnail operations in DV mode are composedof the following.THUMBNAILMODEINDICATOROPERATIONDELETEREPAIR CLIPOTHER FUNCTIONSCARD FORMATCARD STATUSSYSTEM INFOOperating the thumbnail menu1 Press the MENU button in the thumbnailscreen.The thumbnail menu is displayed.To display the standard setting menu, pressand hold down the MENU button (approx. 3seconds).2 Using the up or down button of the cursorbutton, select a menu item.3 Press the right button of the cursor button orthe ENTER button.Repeat this operation to display additionalitems.Press the left button of the cursor button toreturn to the previous item.Press the MENU button to close thethumbnail menu.Selecting the thumbnail displaymethodYou can change the thumbnail display method.1 Press the MENU button in the thumbnailscreen.The thumbnail menu is displayed.2 Select the thumbnail menu THUMBNAIL item(Page 113), and press the ENTER button.•••3 Select the item you want to set, and pressthe ENTER button.MODE:ALL:Displays all the clips.MARKER:Displays only clips for which a shot mark hasbeen added.INDICATOR:ON:Displays markers (shot marks, etc.) on thethumbnails.OFF:Markers (shot marks, etc.) are not displayedon the thumbnails.Deleting clipsClips that are deleted cannot be restored. Besure to check carefully before deleting them.Deleting all clips1 Press the MENU button in the thumbnailscreen.The thumbnail menu is displayed.2 Select the DELETE item (Page 113) for thethumbnail menu OPERATION, and thenpress the ENTER button.3 Select ALL CLIPS and press the ENTERbutton.The confirmation screen is displayed.4 Select YES and press the ENTER button.The clip is deleted.•■
