Panasonic AVCCAM AG-HMC81E Operating Instructions Manual

Contents

Panasonic AVCCAM AG-HMC81E Operating Instructions Manual Manual pdf 49 page image

49Chapter 1: Operations in AVCHD modeUseful playback functionsAdding a SHOT MARK to a clipAdding a SHOT MARK ( M ) will make it easier tofind the clips you are looking for.1 Using the cursor button, select the clip forwhich a SHOT MARK will be added.You can also set or release SHOT MARKsettings while shooting a clip, from thethumbnail screen, or from the clip informationscreen.2 Press the USER button to which theSHOT MARK function has been allocated.(Page 106)To remove a SHOT MARK, repeat the above steps.It is not possible to add shot marks to clipsrecorded using a consumer camcorder model.Repeat playbackUse this setting to repeatedly play back allavailable clips.1 Press the MENU button.Menu operation (Page E-40 of Vol.1)2 Set the REPEAT PLAY item in the PLAYSETUP screen to ON.3 Select EXIT and press the ENTER button toreturn to the thumbnail screen.When the playback operation is performed, theplayable clips are played back repeatedly.Repeat playback will continue until playbackis paused.When REPEAT PLAY is set to ON,appears on the playback screen.To turn the repeat playback setting off, selectOFF in step 2.Resume playback (RESUME PLAY)Use this setting to play back from where clip hadpreviously been paused.1 Press the MENU button.Menu operation (Page E-40 of Vol.1)2 Set the RESUME PLAY item in the PLAYSETUP screen to ON.3 Select EXIT and press the ENTER button toreturn to the thumbnail screen.•••••••4 Select a clip for playback.If playback has previously been paused, theremainder of the clip will be played next timethe clip is selected for playback.The resume playback indicator will bedisplayed on the clip thumbnail.To turn the resume playback setting off,select OFF in step 2.Viewing images on a televisionYou can view the images on a television if youconnect the unit to a TV set using a separately soldvideo cable, HDMI cable or component cable.1 Connect the camera-recorder to the TV set.(Page 52)2 Start playback.To show the information that appears on theviewfinder on a television, press the EXT.DISPLAY button on the remote control.Press the EXT. DISPLAY button again toclear the display.ZOOMSTART/STOPPHOTOSHOTEXTDISPLAYDATE/TIMEVOLPLAYSTOPSKIP SKIPMENUENTERPAUSESEARCHSTILL ADV STILL ADVSEARCHChecking the date and timePress the DATE/TIME button on the remote controlto show the date and time of shooting on theviewfinder. The display changes as follows eachtime you press the button.TimeDateTime and DateNo displayZOOMSTART/STOPPHOTOSHOTEXTDISPLAYDATE/TIMEVOLPLAYSTOPSKIP SKIPMENUENTERPAUSESEARCHSTILL ADV STILL ADVSEARCH•••