74Chapter 2: Operations in DV mode2 Select the TC PRESET item in the settingmenu RECORD SETUP screen, and thenpress the ENTER button.Menu operation (Page E-40 of Vol.1)Operations may also be performedusing buttons on the remote control thatcorrespond to those on the camera. Fordetails, see “Description of parts (Remotecontrol)”. (Page E-3 of Vol.1)3 Select YES and press the ENTER button.4 Using the cursor button, select the item youwant to set with the left or right button, andset the numerical value with the up or downbutton.You can reset the time code to zero by pressingRESET button.CameraAUDIO LEVELCH1 CH2AUDIO SELECT AUDIO INCH1AUTOMANFRONTREARCH2PHOTO MCRDVAVCHD AUDIO SELECTCOUNTER RESET/ TC SETAUDIO INCH1AUTOMANFRONTREARCH2AUTOMANUAL••Recharging the built-in batteryThe camera’s internal battery saves the date andtime.When SET DATE AND TIME is displayed evenwhen the date and time are set, it means that thecharge of the internal battery is depleted. Do thefollowing to recharge it.Reset the date and time when fully recharged.1 Connect the AC adaptor. (Page E-26 of Vol.1)Leave the POWER switch at OFF.2 Leave the camera-recorder like this forabout 4 hours.The internal battery charges during this time.Check the time code and menu operationsafter recharging.If the date and time are not memorized afterrecharging, the internal battery requires changing.Please consult the place of purchase.Setting the time codeIn the setup menus, RECORD SETUP screen, setthe following time code related items.(Pages 10)TCGTC PRESETSpecifying the time codeSet TC PRESET so you can record a value of yourchoice as the initial setting for the time code to beused at the start of recording.1 Set the POWER switch to ON.(Page E-30 of Vol.1)•••••Charging the built-in battery/Setting the time code
