Panasonic AW-HE130KP Operating Instructions Manual

Also see for AW-HE130KE: Operating instructions Installation instructions Operating instructions

Contents

Panasonic AW-HE130KP Operating Instructions Manual Manual pdf 101 page image

Maintenance screen [Maintenance]Among the various maintenance operations performed on this screenare system log checks, system version upgrading and initialization of theunit.The Maintenance screen consists of five tabs: [System log], [Productinfo.], [Status], [Default reset] and [Back up]. System log screen [System log]A maximum of a hundred system logs can be stored in the unit’s internalmemory.When this maximum number has been exceeded, the old logs areoverwritten successively by the new logs.The logs are cleared when the unit’s power is turned off.NoThe running numbers of the system logs are displayed here.Time & dateThe times and dates when the logs were generated are displayedhere.The 24-hour system is used to display this information.Error descriptionDetails of the error logs are displayed here.For further details on the system logs, refer to page 108. Product information screen [Product info.]The versions of the unit’s software can be checked on this screen.The [Model no.], [MAC address], [Serial no.], [Firmware version] andother information about the unit is displayed.Model no.Display the unit’s model number.MAC addressDisplay the unit’s MAC address.Serial no.Display the unit’s serial number.Firmware versionCPU Software - InterfaceDisplay the software version of the interface.CPU Software - Camera MainDisplay the software version of the camera unit.CPU Software - ServoDisplay the software version of the servo.CPU Software - NetworkDisplay the software version of the network.EEPROM - InterfaceDisplay the version of the setup data for the interface.FPGA - LensDisplay the FPGA version of the lens.FPGA - AVIODisplay the FPGA version of the AVIO.FPGA - ComDisplay the FPGA version of the communication.Viewer software installation counterThe number of plug-in viewer software applications which have beeninstalled automatically from the unit is displayed by this counter.Firmware fileUpdate the firmware.For details on how to update, see “Updating the firmware” (→ page 101).StatusDisplay the current status of the unit.z Updating the firmwarePerform the following to update the firmware.1. After consulting with your dealer, download the latestsoftware to the hard disk of your personal computer.• No spaces or full-size characters can be used for the directory inwhich the software will be stored.• Keep the maximum combined number of characters to be used forthe name of the directory in which the software will be stored and forthe name of the software which has been downloaded to less than250 characters.2. Click the [Browse] button, and specify the downloadedsoftware.3. Click the [Execute] button.The software upgrade check screen is displayed.After upgrading the software version, be absolutely sure to delete thetemporary Internet files.• Be absolutely sure to upgrade the software versions from thepersonal computer in the same network (LAN) as the unit whosefirmware version is to be updated.101Web screen configurations (continued)