Panasonic AW-HE130KP Operating Instructions Manual

Also see for AW-HE130KE: Operating instructions Installation instructions Operating instructions

Contents

Panasonic AW-HE130KP Operating Instructions Manual Manual pdf 54 page image

Output screenOutputFormat 1080/59.94iDown CONV. Mode SqueezeFrequency 59.94HzColor Bars Setup OffReturnFormat[(For 59.94Hz) 1080/59.94p, 1080/29.97p*1 , 1080/23.98p,1080/59.94i, 1080/29.97PsF, 1080/23.98PsF, 720/59.94p,480/59.94p(i),(For 50Hz) 1080/50p, 1080/25p*1 , 1080/50i, 1080/25PsF,720/50p, 576/50p(i)]*1 Native outputThe video format is changed on this screen.For details on how to change the format, refer to “Changing theformat” (→ page 55).In the case of the 480/59.94p(i) or 576/50p(i) format, the P signal isoutput to the HDMI connector, and the I signal is output to the SDIoutput and VIDEO output connectors.Down CONV. Mode[Squeeze, SideCut, LetterBox]The down-conversion mode is selected here.SqueezeThis setting is used when the aspect ratio of themonitor is to be set to 16:9. If the monitor is set to the4:3 aspect ratio, the images will be squeezed in thewidth direction and extended in the height direction.SideCutThis setting is used when the aspect ratio of themonitor is to be set to 4:3. With the vertical heightserving as the reference, the parts which extendbeyond this at the two sides are cropped changing theview of the angle.LetterBoxThis setting is used when the aspect ratio of themonitor is to be set to 4:3. With the horizontal widthserving as the reference, black bands are added at thetop and bottom changing the view of the angle.• The mode switches when the setting is fixed.Frequency [59.94Hz, 50Hz]This item is selected to switch the frame frequency.• When the frequency is switched, [Format] is set as follows.59.94Hz 50Hz1080/59.94p  1080/50p1080/29.97p  1080/25p1080/23.98p  1080/25p1080/59.94i  1080/50i1080/29.97PsF  1080/25PsF1080/23.98PsF  1080/25PsF720/59.94p  720/50p480/59.94p(i)  576/50p(i)• For details on how to change the frequency, refer to “Changing thefrequency” (→ page 55).Color Bars Setup [Off, On]This is only enabled when [Frequency] is set to [59.94Hz].Select the color bar setup level (Off: 0.0IRE, On: 7.5IRE) for theVIDEO OUT signal.ReturnReturn to the previous menu level.54Camera menu items (continued)