Multi screen setup screen [Multi-Screen setup]The cameras whose images are to be displayed on the multi screen areset here.IP addressInput here the IP address of the camera whose images are to bedisplayed on the multi screen or the host name. With one groupconsisting of 4 cameras, up to four groups of cameras (a total of 16cameras) can be registered.Input as follows if the HTTP port number of the camera whose imagesare to be displayed has been changed.IPv4 address entry example http://192.168.0.10:8080IPv6 address entry example http://[2001:db8:0:0:0:0:0:1]:8080Enter the following when connecting via HTTPS.Example of input https://192.168.0.10/Maximum number of characters 1 to 128 half-size charactersFactory settings:Cam 1: selfcameraCam 2 to Cam 16: Not registered• When connecting via HTTPS, install the security certificate for thecamera to be displayed. (→ page 99)• This unit is configured for cameras for which “selfcamera” isdisplayed for the IP address or host name.• When configuring a host name, the DNS settings of the personalcomputer that will display the multi screen must be configured.For details on the personal computer’s DNS settings, consult yournetwork administrator.Camera titleInput the camera title here. The camera title which has been input isdisplayed on the multi screen.Maximum number of characters 0 to 20 half-size charactersInvalid characters SymbolsFactory settings:Cam 1: The product number appears.Cam 2 to Cam 16: blank• When a 16-screen multi screen is selected, camera titles may beonly partially displayed.• Multi screen displays are displayed in 4:3 aspect ratio.86Web screen configurations (continued)
