When 50 Hz has been set as the unit’s frequency:When [Step] isselected as the[Shutter Mode]When [Synchro]is selected as the[Shutter Mode]For 50p/ 50i 1/60, 1/120, 1/250,1/500, 1/1000, 1/2000,1/4000, 1/1000050.15Hz to 535.71Hz(255 steps)For 25p 1/25, 1/60, 1/120, 1/250,1/500, 1/1000, 1/2000,1/4000, 1/10000• When [Shutter Mode] is set to [Off] in 29.97P, 23.98P, or 25P mode,the shutter speed is set to [1/50].Gain [Auto, 0dB to 36dB]The image gain is adjusted here.In locations which are too dark, adjust the gain upward; conversely, inlocations which are too bright, adjust it downward.When [Auto] is set, the light quantity is adjusted automatically.The noise increases when the gain is increased.• [Gain] cannot be set to [Auto] when [Frame Mix] is set to [18dB] or[24dB].AGC Max Gain [6dB, 12dB, 18dB]When [Auto] is selected as the [Gain] setting, the maximum gain-upamount can be set.Frame Mix [Off, 6dB, 12dB, 18dB, 24dB]Select for frame addition (gain-up using sensor storage) amount.When frame addition is performed, it will appear as if the images aremissing some frames.This cannot be configured when the format is 1080/29.97p,1080/23.98p, 1080/29.97PsF, 1080/23.98PsF, 1080/25p, or1080/25PsF.[Frame Mix] cannot be set to [18dB] or [24dB] when [Iris Mode],[Gain], or [Focus Mode] is set to [Auto]. (When setting [Frame Mix] to[18dB] or [24dB], set [Iris Mode] and [Focus Mode] to [Manual] andset [Gain] to any setting other than [Auto]. )• Under discharge tube illumination, such as fluorescent and mercury-vapor lights, the brightness may change synchronously, colors maychange, and horizontal stripes may flow up and down the image.In such cases, we recommend setting the electronic shutter speedto 1/100 in regions with 50 Hz power supply frequency, and to OFFin regions with 60 Hz power supply frequency.ND Filter [Through, 1/8, 1/64]Set the transmittance of the lens' built-in ND (neutral density) filter.The filter switches when the setting is fixed.Through Do not set ND filter.1/8 Set ND filter transmittance to 1/8.1/64 Set ND filter transmittance to 1/64.ReturnReturn to the previous menu level.Brightness 2/2 screenBrightness 2/2Day/Night DayReturnDay/Night [Day, Night]Switch between standard shooting and night-vision shooting (shootingwith infrared light).Day Standard shooting (day mode)Night Night-vision shooting (night mode)• In night mode, video output will be in black and white. In addition,the iris will be forcibly opened.• White balance adjustment is not possible in night mode.• ND filter switching is not possible in night mode.• Pedestal adjustment is not possible in night mode.ReturnReturn to the previous menu level.48Camera menu items (continued)
