4. Tap [Confirm] to apply the calibration.• The marker turns blue.• To perform further calibration, tap the surrounding [+] markers andset the positions.For details on detailed calibration control settings, refer to the Helpscreen of PTZ Cntrl.5. When you are finished calibrating, tap [Update] to exitcalibration mode.Controlling the cameras with PTZ CntrlOnce the connection settings and initial settings are complete, touchingthe camera video in the lower area of the home screen of PTZ Cntrloperates the HD integrated camera of the upper area so that its shootingcenter becomes the touched position.To adjust the zoom position, use the slider in the center of the screen orpinch*1 the upper area of the screen.You can also tap the camera image in the upper area of the screen tomove the center of the image to the tapped position or drag the imageto control the camera movement to further control what images arerecorded.*1 Pinch: Gesture using two fingers.Furthermore, you can make fine adjustments to the shooting angleof view as touching the camera video in the upper area changes thecamera position so that the touched position becomes the center.Preset buttons appear when you tap [] in the lower area of the screen.Tap the number buttons to quickly recall stored camera positions.You can tap and hold the number buttons to store up to nine presetpositions.For details on further home screen operations, refer to the Help screenof PTZ Cntrl.32Controlling the cameras with the PTZ Cntrl app (continued)