6 Setup Menu105“This camera is used for Sensor Alert mode. Set Sensor Alert to [-] on the [CameraSensors] screen.”Deactivate the camera for Sensor Alert mode as explained in the error messageand then try erasing the camera.6.6 Changing the Order of the Camera List1. Select [Camera Setup] from the [Setup] screen (see page 79) and pressENTER.2. To move a camera up in the list, select it and press 2.3. To move a camera down in the list, select it and press 3.Note• The order of the cameras displayed in the Camera List in normal mode and theorder of cameras displayed in the Quick Setup screen are controlled separately.The order of cameras displayed in the Quick Setup screen when addingcameras is not the same as ordered in the Camera List.6.7 Starting Easy Network Setup ManuallyYou can use Easy Network Setup to change the user name and password of allcameras that the BL-WV10 assigns to cameras during Quick Setup, as well as setcameras to be able to be accessed from the Internet.You can use Easy Network Setup using the procedure described on page 23 orpage 29. Use the procedure described below if you want to start Easy NetworkSetup without changing the mode switch position.1. Select [Easy Network Setup] from the [Setup] screen (see page 79) and pressENTER.2. Enter the security code.• The default code is 9999.3. Press ENTER to start Easy Network Setup.4. Select [Yes] when prompted, then press ENTER.• The [Easy Network Setup] screen appears.5. Refer to the procedure on page 23 if the BL-WV10 is connected to a router,or page 29 if the BL-WV10 is not connected to a router.
