2 Setup236. Connect an Ethernet cable to one of the LAN jacks on the router and to oneof the LAN jacks on the BL-WV10.7. Connect the router to the power outlet and turn it on.You are now ready to use the BL-WV10's Easy Network Setup utility to configurethe BL-WV10.2.4.2 Easy Network Setup (When Using a Router)After the BL-WV10 starts up for the first time, the [Easy Network Setup] screen isdisplayed. Here you can set the administrator user name and password, and selectwhether access from the Internet is configured automatically or manually.1. Confirm that the [Easy Network Setup] screen is displayed.2. Use the navigator keys to select [User Name], then press ENTER.3. Enter the administrator user name (6 or more characters and/or digits), thenpress STOP to save the setting.• For instructions on entering characters, see page 114.4. Select [Password], then press ENTER.5. Enter an administrator password (6 or more characters and/or digits), thenpress STOP to save the setting.6. Select [Mobile Access], then press ENTER.7. Select [Auto] or [Manual] as desired, then press ENTER.• Select [Auto] only if you will connect the BL-WV10 to a router that supportsUPnPTM . Refer to the operating instructions included with your router formore information.• See the Panasonic Network Camera support website athttp://panasonic.co.jp/pcc/products/en/netwkcam/ for information onUPnPTM routers that Panasonic has verified as being compatible with thisproduct.
