2 Setup212.3 Local and Remote CamerasCameras accessed by the BL-WV10 are referred to as either “local” or “remote”cameras, based on the way in which they are configured.Local cameras allow you to not only monitor images, but can be used inconjunction with the various features of the BL-WV10. Remote cameras, such ascameras accessed over the Internet, can be monitored, but certain BL-WV10features may not be available with remote cameras.Note• If a camera does not meet the firmware requirements noted on page 3, thecamera will be registered as a remote camera or may not be able to beregistered. We recommend updating the camera's firmware to the latestversion before registering it. For more information, see the operatinginstructions included with your camera.• User names and passwords shown here are examples only.INTERNETBL-WV10RouterUser Name: AAAAAAPassword: BBBBBBUser Name: WWWWWWPassword: XXXXXXAdmin. User Name: AAAAAAAdmin. Password: BBBBBBRemote CameraCameras connected via an Internet connectionRemote CameraCamera's Admin. User Nameand Admin. Password isdifferent from the BL-WV10'sUser Name and PasswordLocal CameraCamera's Admin. User Nameand Admin. Password is thesame as the BL-WV10's UserName and PasswordLocal Area Network (LAN)Local CameraCameras configured using the BL-WV10'sQuick Setup utility (some exceptions apply)
