Panasonic CF-18 Series Reference Manual

Also see for Toughbook CF-18 Series: Precautions for Installing Precautions for Installing Operating instructions Supplementary instructions Supplementary instructions

74ModemCAUTIONz Do not use the PBX internal phone lines installed in company offices. Doing so maylead to a fire or electric shock.z It is not possible to connect the modem to any of the following lines.• Internal home phones• Intercomsz Be sure to connect the modem telephone cable into the modem port, not into the LANport.z The modem may be damaged by sudden high voltage surges, as may occur in theevent of a lightning strike. We recommend use of a surge protector.1 Connect the computer and the telephone jack (A) using a modemtelephone cable (included)(B).Open the modem cover, position the cable so that the tab (C) matches the port ( ),and insert the cable until you hear a "click".2 Change the settings as necessary.A Select [Edit] in [start] - [Control Panel] - [Printers and Other Hardware] -[Phone and Modem Options] - [Dialing Rules], then select the location fromwhich you will be dialing in [Country/region].B Input the necessary information (items such as the area code, dialing rules,etc.), select [OK], then select [OK].NOTEz Do not enter either the standby or hibernation mode during communications.z To remove the cable, pull out while pressing down on the tab.z

The modem of this computer has Modem-on-Hold function, which allows you toreceive an incoming call and stay connected to the internet (Call-Waiting service fromyour phone company is required. Your ISP must also support V.92). To use thisfunction, select on the taskbar and make settings.Connecting the Internal Modem with a Telephone Jack