Panasonic CF-18 Series Reference Manual

Also see for Toughbook CF-18 Series: Precautions for Installing Precautions for Installing Operating instructions Supplementary instructions Supplementary instructions

96Setup Utility*1 This is displayed even if a floppy disk drive is not connected or [Legacy USB Support] is set to [Dis-able] on [Advanced] menu.The following drive can be used for startup (recommended).Panasonic USB floppy disk drive (optional. CF-VFDU03)*2 "+" is displayed if the device that can be used for startup is connected. Pressing Enter expands orcollapses devices with a - or +. Pressing Ctrl + Enter expands all the devices.If two or more devices are displayed at [Floppy Drive] or [Hard Disk Drive], select the device youwant to use for startup, and then press F6 until the device is at the top of the menu.*3 This is displayed even if a CD/DVD drive is not connected or [Legacy USB Support] is se to [Dis-able] on [Advanced] menu.*4 This is displayed even if [LAN] is set to [Disable] on [Advanced] menu.The default order is as follows:[Floppy Drive] -> [Hard Disk Drive] -> [USB CD/DVD Drive] -> [LAN].To move a device up by one in the order, select the device with Ï and Ð, and then press F6.To move a device down by one in the order, select the device with Ï and Ð, and then pressF5.NOTEz [Boot] menu cannot be changed when the Setup Utility is started up with the UserPassword.z Boot MenuThe device for starting up the operating system can also be selected during computerstart-up. After the computer is turned on, and Esc is pressed at [Panasonic] bootscreen, [Boot Menu] (the device selection screen) will appear. When the setting of[Boot] menu is changed, the selection screen display will also change. [Boot Menu] isdisplayed only when [Boot First Menu] in [Security] menu is set to [Enable].Boot Menu+Floppy Drive *1*2+Hard Disk Drive *2USB CD/DVD Drive *3LAN *4