Panasonic CF-18 Series Reference Manual

Also see for Toughbook CF-18 Series: Precautions for Installing Precautions for Installing Operating instructions Supplementary instructions Supplementary instructions

88Setup UtilityThe Setup Utility is a utility for setting the computer's operating environment (passwordsettings, startup drive selection, etc.). The following six menu items are available.[Information], [Main], [Advanced], [Security], [Boot], [Exit]1 Turn on or restart the computer.2 Press F2 while [Panasonic] boot screen is displayed a few momentsafter the computer begins the startup procedure.If [Enter Password] is displayed, enter your password.When the Setup Utility is started with Supervisor Passwordz You can register all items of the Setup Utility.When the Setup Utility is started with User Passwordz You can not register [Advanced] and [Boot] menu.z On [Security] menu:• [Set Supervisor Password] and [Hard Disk Lock] will not be displayed.• [Password on boot], [Setup Utility Prompt], [Boot First Menu] and [UserPassword Protection] will be displayed, but cannot be set.• The User Password can be changed only when [User PasswordProtection] has been set to [No Protection]. The User Password cannot bedeleted.z [Get Default Values] will not be displayed on [Exit] menu.z F9 does not work.NOTEz When [Password on boot] in the Setup Utility is set to [Disable], the password is notnecessary when the computer is started up, but the password becomes necessarywhen the Setup Utility is started up. This alternative makes it possible to prevent thecontents of the Setup Utility from being changed.z If you fail to press F2 at the right moment, the Setup Utility will not start up. In thiscase, power off the computer and try again.z To close the Setup Utility, press Esc, select the exiting method in [Exit] menu, thenpress Enter.Running the Setup Utility