Menu Settings90VQT0W88[PIXEL REFRESH]Press [ ] to display the [CUSTOM] menuand select the item to set. (P86)This checks if the picture on the imagesensors and the picture after pictureprocessing match each other optimally.The camera is set to the best setting at thetime of purchase. We recommend that youcheck the setting once every year.Turn the camera off and on after the pixelsare corrected.[NO RELEASE WITHOUT LENS]Press [ ] to display the [CUSTOM] menuand select the item to set. (P86)If you set [ON], you cannot press theshutter button when a lens is not attachedto the camera body or is not attachedcorrectly. (Release prevention)[ON][OFF]You can use custom set to save the currentmenu settings for the camera. You can saveup to 3 menu settings in advance for futureuse.Save the menu settings in advance andthen select a menu setting that matches therecording situation etc. This is a convenientway to avoid resetting the menu settingseach time you take a picture.1 Press 3/4 to select[CUST. SET MEM.] and then press1.2 Press 3/4 to select[CUSTOM SET 1],[CUSTOM SET 2] or[CUSTOM SET 3] and then press[MENU/SET].3 Press 3 to select [YES] and thenpress [MENU/SET].(Only when there are previously savedsettings.)4 Press [MENU/SET] to close themenu.∫ Using settings in [CUSTOM SET]Select the saved setting from[CUSTOM SET] in the [CUSTOM] menu.(P87)• The settings for each menu item are notlost when the camera is turned off even ifyou do not use custom set to save them.Saving settings in[CUST. SET MEM.]SETMENUSETMENU1/4EXIT MENUSELECTCUSTOMDIREC. EX. COMP.CUSTOM SETCUST. SET MEM.OFFNORMALFUNC.2 SETFUNC.1 SETCUST.SET MEM.SETMENUSET MENUCANSEL SELECTCUSTOM SET 2CUSTOM SET 3CUSTOM SET 1SETMENUCUST.SET MEM.SELECTOVER WRITE CURRENTCAMERA STATUS ASCUSTOM SET 1 ?NOYESSET MENU
