100VQT1L86Connecting to other equipmentConnecting to a PCBy connecting the camera to a computer,you can upload your pictures, thenuse the software on the included CD-ROM ([PHOTOfunSTUDIO-viewer-] forWindows® ) to print or send your imagesby e-mail.If you use Windows 98/98SE, installthe USB driver and then connect thecamera to the computer.For details, refer to the operatinginstructions (PDF file) of the software.Turn on the camera and the PC.Connect the camera to a PC viathe USB connection cable C(supplied).The screen to select [PictBridge (PTP)]or [PC] is displayed.If [USB MODE] in setup menu is set toother than [SELECT ON CONNECTION],the screen is not displayed ( P23 ).CBDADIGITALAV OUT EACCESSA AC adaptor (DMW-AC6PP: optional)B DC coupler (DMW-DCC2: optional)Use batteries with suffi cient batterypower or the AC adaptor A and theDC coupler B.•••12•••Always use a genuine Panasonic ACadaptor (DMW-AC6PP: optional) andDC coupler (DMW-DCC2: optional).Make sure the camera is off beforeconnecting or disconnecting the ACadaptor.C USB connection cable (supplied)Connect the USB connection cablewith the [c] mark facing the [q]mark on the [DIGITAL] socket.D This message appears during datatransfer.E Check the facing of the connector andpush straight in.Hold E and then insert or pull the USBconnection cable straight. Do not tryto force the connector in backwards orsideways. This can damage this unit andthe equipment you are connecting.Select [PC] using r and press[MENU/SET].[Windows]The drive appears on the [My Computer]folder.If it is the fi rst time you are connectingthe camera to a PC, the required driver isinstalled automatically so that the cameracan be recognized by the Windows Plugand Play, then it appears on the [MyComputer] folder.[Macintosh]The drive is displayed on the screen.The drive is displayed as [LUMIX] when youconnect the camera with no card inserted.The drive is displayed as [NO_NAME] or[Untitled] when you connect the camerawith a card inserted.••••3•••