Panasonic DMC LZ1 - Lumix Digital Camera Operating Instructions Manual

Contents

28VQT1L86BasicRecording conditionsDusk/Sunrise glow/Low-light intensity/Jitter(example)The camera cannot detect the face sincethe face occupied in the screen is too big.In any case, the camera makes thebest setting. To take pictures in somespecifi c scene, using the recording modematching your purpose is recommended.(example)When [ ] (i PORTRAIT) changes to [ ] [PORTRAIT] mode ( P52)When [ ] (i SCENERY) changes to [ ] [SCENERY] mode ( P53)When [ ] (i MACRO) changes to [ ] Macro shooting ( P46)When the flash is set to AUTO [ ],[i NIGHT SCENERY] cannot be used.When the fl ash is set to Forced FLASHOFF [ ], [i NIGHT PORTRAIT] cannotbe used.Intelligent ISOThe camera automatically sets the adequateISO sensitivity and shutter speed accordingto the action and brightness of the subject.Face detectionThe camera automatically detects theperson’s face. The focus and exposurecan then be adjusted to fi t that face.(maximum: 15)Quick AFFocusing will be faster when the shutterbutton is pressed as the cameraautomatically adjusts the focus when thereis not much jittering.StabilizerThe camera automatically detects andcompensates for jittering.–•••••You can automatically display picturesvertically if they were recorded holdingthe camera vertically ( P32, 94).When you press the shutter button, thescreen may become bright or dark fora moment. This function allows easyadjustment of focus and the recordedpicture will not be affected.Be careful not to move the camera whenyou press the shutter button.Do not cover the photo fl ash or the AFassist lamp with your finger or otherobjects.Do not touch the lens.In [i NIGHT SCENERY] the shutterspeed becomes 8 seconds only when thecamera has determined that there is littlejitter such as when using a tripod. Do notmove the camera while taking pictures.You cannot use the following functions.Exposure compensationAuto bracketWhite balance fi ne adjustmentDigital zoomFlash ( P43)You can select the setting of flash AUTO[ ] or Forced OFF [ ] .When AUTO is selected, depending on thetype of subject or brightness, flash is set toi AUTO [ ], i AUTO/Red-eye reduction[ ], or i Slow sync./Red-eye reduction[ ].In [ ] or [ ] fl ash mode, fl ashemitted twice.•••••••––––■•