75VQT1L86Advanced-Shooting[ BURST]Shooting in quick successionWhen you press and hold the shutterbutton several pictures are taken insuccession.Burst modeBurst speed 2.5 fps* Approx. 2 fpsNumber ofrecordablepicturesGMax. 3(DMC-LZ10)/Max. 4(DMC-LZ8)Depending onthe remainingcapacity ofthe built-inmemory / card.HMax. 5(DMC-LZ10)/Max. 7(DMC-LZ8)* The burst speed is constant regardless ofthe transfer speed of the card.The focus is fi xed when the fi rst pictureis taken. The exposure and the whitebalance vary depending on the burstmode setting. (When burst mode is set to[ ], they are fi xed to the values set forthe fi rst picture and when the burst speedis set to [ ], they are adjusted eachtime you take a picture.)When the self-timer is used, the numberof recordable pictures in burst mode isfi xed to 3.In burst mode, the fl ash setting is fi xed toForced FLASH OFF [ ].Burst mode is not canceled even whenthe camera is turned off.When the burst mode setting is set to[ ], the burst speed becomes slowerhalfway. (The exact timing of this dependson the type of card and each settings.)The burst speed may become slower if theISO sensitivity is set to high or in dark places.••••••If you are following a moving subject whiletaking pictures in a place where there isa large difference between the light andshade, the exposure may not becomeoptimal.If you take pictures in burst mode withthe built-in memory, it will take time towrite the picture data.In burst mode, auto review is activatedeven if the setting is off.Burst mode cannot be set in [STARRYSKY] and [HI-SPEED BURST] modes.Auto bracket mode setting is canceledwhen [BURST] is activated.T[COLOR EFFECT]Setting color effects for therecorded picturesYou can use following types of color effectsdepending on the image of the picture.Item SettingOFF Standard settingB/W Black and whiteSEPIA Sepia colored picturesCOOL More blueWARM More redNoise may become noticeable whentaking pictures in dark places. If it bothersyou, we recommend setting [COLOREFFECT] to [OFF].When in intelligent auto mode [ ],[COOL] and [WARM] cannot be set.When in intelligent auto mode [ ], it isset independently from other modes.••••••••Press [ ] to display the [REC] mode menu and select the item to set. ( P19)