103VQT1L86Connecting to other equipmentConnecting to a PictBridge-compliant PrinterBy connecting the camera directly to aprinter supporting PictBridge via the USBconnection cable (supplied), you can selectthe pictures to be printed or start printingon the LCD monitor. Make the necessarysettings on your printer beforehand. (Readyour printer’s operating instructions.)Turn on the camera and the printer.Connect the camera to a printervia the USB connection cable A(supplied).The screen to select [PictBridge (PTP)]or [PC] is displayed.If [USB MODE] in setup menu is set toother than [SELECT ON CONNECTION],the screen is not displayed ( P23 ).ACDIGITALAV OUT DBA USB connection cable (supplied)Connect the USB connection cablewith the [c] mark facing the [q]mark on the [DIGITAL] socket.B AC adaptor (DMW-AC6PP: optional)C DC coupler (DMW-DCC2: optional)Use batteries with suffi cient batterypower or the AC adaptor B and theDC coupler C.Always use a genuine Panasonic ACadaptor (DMW-AC6PP: optional) andDC coupler (DMW-DCC2: optional).12•••••Make sure the camera is off beforeconnecting or disconnecting the ACadaptor.D Check the facing of the connector andpush straight in.Hold D and then insert or pull the USBconnection cable straight. Do not tryto force the connector in backwards orsideways. This can damage this unit andthe equipment you are connecting.Select [PictBridge] using e andpress [MENU/SET].Do not use any other USB connectioncables except the supplied one.If a card is not inserted when the camerais connected to the printer, you can printthe picture data on the built-in memory.If a card is inserted, you can print thepicture data on it.You cannot switch between the built-inmemory and the card while the camerais connected to the printer. When youwant to switch between the built-inmemory and the card, disconnect theUSB connection cable, insert (or remove)the card and then connect the USBconnection cable to the printer again.To print the name or the age in[BABY] and [PET] in scene mode, thedeparture date for [TRAVEL DATE] orthe text input in [TITLE EDIT], use the[PHOTOfunSTUDIO-viewer-] software inthe CD-ROM (supplied) and print fromthe PC. For information about this, referto the separate operating instructions(PDF fi le) of the software.To fi nd out more about PictBridgecompliant printers, contact your localdealer.••3•••••