Panasonic DMR-EA18K Operating Instructions Manual

Contents

Panasonic DMR-EA18K Operating Instructions Manual Manual pdf 20 page image

20RQT9048To cancel a scheduled recording inprogressto select the DVD drive.Confirmation screen appears.–w to select “Stop recording”, thenNotesRecording stops and ‘one-time’ programs are deleted from the ScheduleList. Programs scheduled to record ‘Daily’ and ‘Weekly’ remain on theSchedule List and are set to begin at the next scheduled time.Check, Change, or Delete ProgramsThe scheduled recording list can be viewed even whenthe unit is in “recording standby” mode.See “Tips” (➔ right) for explanation of iconsdisplayed.–e, r to select the program.3a to modify the program.e, r, w, q to make changes,then3bor, then to delete.You cannot delete programs that are currentlyrecording.–“z” lights on the unit’s display.–NotesIf the program schedule is changed by the TV station, then this unitwill not be able to detect the change.TipsYou can enter up to 16 programs a month in advance.Schedule List Remaining Recording Time3/26 Tue 12:53 PM1:58 SPDVDChannelNo Date OnNew Scheduled RecordingOff Mode CheckA BA Schedule List screen icons*: Currently recording: Programs are overlapped. Recording of the program withthe later start time starts when the earlier program finishesrecording.Q: You stopped a weekly or daily scheduled recording. The icondisappears when the next scheduled recording starts.: The disc was full. (not enough space): The TV program may not be recorded due to copy-protect.X: Recording stopped (Dirty disc, etc.)B CheckOK: Recordable➔ (Date): The last day of daily or weekly recording.!: It may not be possible to record because:the disc is write-protected.there is no more space left.the number of possible recordings has reached itsmaximum.Overlap: When the date and time overlap with another scheduledrecording, only a part of the program can be recorded.To release the unit from recordingstandby(Before recording starts)The unit turns on and “z” on the unit’sdisplay goes out.–Be sure to press [^ DVD POWER] to return the unit to standby modebefore the scheduled recording time. Scheduled recording will workonly if “z” is displayed.•–––Advanced Scheduled Recording