Panasonic DMR-EA18K Operating Instructions Manual

Contents

Panasonic DMR-EA18K Operating Instructions Manual Manual pdf 39 page image

39RQT9048Setting MenusVideo MenuRAM -R -R DL -RW(V) +R +R DL +RW DVD-V-RW(VR)PictureSet picture mode.Normal: Default settingCinema: Mellows movies, enhances detail in dark scenes.DNR (Digital Noise Reduction)“On” reduces noise and picture degradation.Progressive*¹ (Progressive/24p*²)Select the method of conversion for progressive output to suit thetype of material being played.Auto1 (normal): Film and video contents are detectedautomatically and converted properly.Auto2: When using “Auto1” and video content isdistorted as shown below.24p*²: DVD-V When this unit is connected to a TV supporting1080/24p output via an HDMI cable, this unit displays eachframe at 1/24 second intervals – the frame interval originallyrecorded in the film, thus faithfully reproducing the originalcinema image.If the settings are changed, then the screen will darken for afew seconds and then playback will start.“Auto1” is set when you turn the unit off or open the disc tray.*¹ Only when you have selected “480p” or higher for “ComponentOutput Signal” (➔ 48) or “HDMI Resolution” (➔ 48)*² Only when you have selected “On” in “24p Output for DVD-Video”in Setup menu (➔ 49)Line-in NR (Only when IN1 or IN2 is selected)Reduces video tape noise during recording. Depending on the videosignal, jittering may occur.On: Noise reduction works for any video input.Off: Noise reduction is off. Select when you want to recordinput as is.Audio MenuRAM -R -R DL -RW(V) +R +R DL +RW DVD-V-RW(VR)V. Surround Sound (Dolby Digital with 2.0 or morechannels only)This function does not work for SAP recordings.Enjoy a surround-sound effect if you are using 2 front speakers(L/R) only.Turn off if it causes distortion.Natural / Emphasis / OffDialog Enhancer (Dolby Digital, 3-channel or moreonly, including a center channel)When “On”, the volume of the center channel is raised to makedialogue easier to hear.Other MenuPositionChange where this menu screen appears on your TV.••Accessing the Management MenusPreparation:RAM SD Release protection (disc, cartridge, card➔ 40).Insert a disc or card.••to select the drive(DVD or SD).With the unit stoppede, r to select “Other Functions”,thenPlaybackProgramDeleteOther FunctionsFlexible RecordingPlaylistsDV Camcorder Rec.DVD ManagementSetupFUNCTIONS Cartridge Protection OffDisc Protection OffDVD-RAMOKe, r to select “DVDManagement” or “CardManagement”, thenSD The only menu available in “CardManagement” is “Format memory card”.TipsTo return to the previous screenPress [RETURN].To exit the screenPress [RETURN] several times.Continued on next page.DVD and Card Management