Panasonic DMR-EA18K Operating Instructions Manual

Contents

Panasonic DMR-EA18K Operating Instructions Manual Manual pdf 62 page image

62RQT9048To reset the ratings level settingsYou can reset DVD-Video rating (➔ 44).With the unit stopped;OPEN/CLOSE to open the disc tray.On the main unitINPUTSELECT REC MODE REC Press and hold bothbuttons for about 5seconds.To restore the unit if it freezesOn the main unitPOWER8 Press and hold formore than 10 seconds.The unit is off.–orOn the main unitPress and hold formore than 1 secondwith a pointed object.Troubleshooting GuideTo Reset this UnitBefore requesting service, make the following checks. If you are in doubt about some of the check points, or if theremedies indicated in the chart do not solve the problem, refer to “Customer Services Directory” on page 71.The following does not indicate a problem with the unit:Regular disc rotating sound.Poor reception due to atmospheric conditions.Image disturbance during search.Periodic interruptions to the reception due to satellite broadcasting breaks.Operations not working due to a poor-quality disc. (Try again using a Panasonic disc.)The unit freezing due to the activation of one of its safety devices (➔ above, To restore the unit if it freezes).••••••General Issues Power PageNo power. Insert the AC power supply cord securely into a known active AC outlet.• 8The unit switches to standbymode.This is a power saving feature. Change “Off Timer” in the Setupmenu to “Off” to always keep the unit on.• 43One of the unit’s safety devices is activated. Press [POWER 8] onthe main unit to turn the unit on.• −The power is turned offautomatically.If you connected this unit to an “HDAVI Control” compatible TV withan HDMI cable, this unit will be automatically turned off when the TVis set to off.• 30General Issues VIERA Link PageVIERA Link doesn’t work. Check the HDMI cable connection. Check that “HDMI” is displayedon the front display when the power for the main unit is set to “On”.Make sure that “VIERA Link” is set to “On”.Check the “HDAVI Control” settings on the connected device.If the connection for the equipment connected with an HDMIcable was changed, or if there was a power failure or the plug wasremoved from the power outlet, “HDAVI Control” may not work. Inthis case, perform the following operations.1. When all equipment connected with the HDMI cable is turned on,turn the TV (VIERA) on again.2. Change the TV (VIERA) settings for the “HDAVI Control” functionto off, and then set to on again. (For more information, see theVIERA operating instructions.)3. Switch the VIERA input to HDMI connection with this unit, and afterthis unit’s screen is displayed check that “HDAVI Control” is working.••••−49−−