Panasonic DMR-EA18K Operating Instructions Manual

Contents

Panasonic DMR-EA18K Operating Instructions Manual Manual pdf 46 page image

46RQT9048PCM Down ConversionSelect how to output audio with a sampling frequencyof 96 kHz or 88.2 kHz. Signals are converted to 48 kHzor 44.1 kHz despite the settings if the signals have asampling frequency of over 96 kHz or 88.2 kHz, or thedisc has copy protection.After selecting “Digital Audio Output” (➔ 45, step 3).e, r to select “PCM DownConversion”, thene, r to select “On” or “Off”, then[On] Signals are converted to 48 kHz or 44.1 kHz.(Choose when the connected equipmentcannot process signals with samplingfrequency of 96 kHz or 88.2 kHz.)[Off] Signals are output as 96 kHz or 88.2 kHz.(Choose when the connected equipment canprocess signals with sampling frequency of 96kHz or 88.2 kHz.)Dolby Digital*Choose whether to output by “Bitstream”, which processesDolby Digital signals on other connected equipment, or toconvert the signals to “PCM” (2ch) on the unit before output.After selecting “Digital Audio Output” (➔ 45, step 3).e, r to select “Dolby Digital”, thene, r to select “Bitstream” or “PCM”,then[Bitstream] When you have connected the unit toequipment displaying the Dolby Digital logo.[PCM] When you have connected the unit toequipment that doesn’t have Dolby Digital logo.DTS*Choose whether to output by “Bitstream”, which processesDTS signals on other connected equipment, or to convertthe signals to “PCM” (2ch) on the unit before output.After selecting “Digital Audio Output” (➔ 45, step 3).e, r to select “DTS”, thene, r to select “Bitstream” or “PCM”,then[Bitstream] When you have connected the unit toequipment displaying the DTS logo.[PCM] When you have connected the unit toequipment that doesn’t have the DTS logo.* Incorrect settings can cause noise to be output whichcan be harmful to your ears and speakers, and audio willnot be recorded properly on media such as mini discs.Select Audio Channel For DV InputYou can select the kind of audio when recording fromthe unit’s DV IN terminal (➔ 22).Perform step 1 of “Accessing the Setup Menu” (➔ 42).e, r to select “Audio”, then qe, r to select “Select AudioChannel For DV Input”, thene, r to select “Stereo 1”, “Stereo 2”or “Mix”, then[Stereo 1] Records audio (L1, R1)[Stereo 2] Records added audio such as narration(L2, R2) subsequent to original recording.[Mix] Records both Stereo 1 and Stereo 2.Status MessagesChoose whether to show status messages automatically or not.Perform step 1 of “Accessing the Setup Menu” (➔ 42).e, r to select “Display”, then qe, r to select “Status Messages”,thene, r to select “Automatic” or “Off”,thenOn-screen LanguageChoose the language for these menus and the on-screen messages.Perform step 1 of “Accessing the Setup Menu” (➔ 42).e, r to select “Display”, then qe, r to select “On-screenLanguage”, thene, r to select “English”, “Español”or “Français”, thenSetup Menus