24RQT9048Quick View (Play x1.3)RAMAllows you to increase the play speed slightly withoutdistorting the audio.During playback(Press and hold.)Press again to return to normal speed.–Slow-motion PlayRAM -R -R DL -RW(V) +R +R DL +RWDVD-V -RW(VR)While pausedorThere are 5 slow-motion speeds. Each pressincreases the speed.Press [q PLAY] to restart normal playback.––NotesIf continued for approx. 5 minutes, slow-motion play pausesautomatically (except DVD-V ).Frame-by-Frame ViewingRAM -R -R DL -RW(V) +R +R DL +RWDVD-V -RW(VR)While pausedEach press shows the next or previous frame.Press and hold to advance or reverse frame-by-frame in succession.Press [q PLAY] to restart normal playback.–––Time SlipRAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)Use to skip in 1-minute or 10-minute increments.During playbacke, r to select the time, thenEach press of e or r advances the intervalby 1 minute (press and hold for 10-minuteintervals).–CM SkipRAM -R -R DL -RW(V) +R +R DL +RW -RW(VR)Skips 1-minute forward with each press.During playbackCreate ChaptersRAMDuring playbackTipsYou can skip to the start of a chapter by pressing [u, i].TipsDepending on the disc, some operations may not be possible.Changing Audio during Playbackto select the audio.Available audio will differ based on disc type.See below.RAM -RW(VR)Stereo Mono L Mono Re.g.: RAM“Stereo” isselected.PlayStereoDVD-RAMRAM -RW(VR) When playing a multilingual broadcast,you can choose between Main Audio and SAP Audio.Main Audio SAP AudioDVD-VThis allows you to change items like the audio channelnumber and the soundtrack language (➔ 38).Soundtrack 1 ENG Digital 3/2.1che.g., English is the selected language.NotesIf you cannot change the audio type when you have used only anoptical digital audio cable for connection, set “Dolby Digital” to “PCM”(➔ 46). Alternatively, you may connect to an amplifier or systemcomponent with an audio cable and change the input on the amplifieror system component to suit the connection (➔ 53).Advanced Playback