Panasonic DMR-EA18K Operating Instructions Manual

Contents

Panasonic DMR-EA18K Operating Instructions Manual Manual pdf 42 page image

42RQT9048“Accessing the Setup Menu”You will have to perform the following step 1 for allother operations on pages 42-49.With the unit stoppedNotesChanged settings remain intact even when switching the unit to standby.TipsTo return to the previous screenPress [RETURN]. Even if you have changed an option, the change isnot activated until you press [OK].To exit the screenPress [SETUP].IR SettingsAllow the set top box connected to this unit to berecognized by this unit.If the set top box setup is changed, carry out the “Test”(➔ right) to check whether or not the Set Top BoxControl operates correctly.Perform step 1 of “Accessing the Setup Menu”(➔ above).e, r to select “Setup”, then qe, r to select “IR Settings”, thenIR SettingsSelect whether or not the set top box connected to thisunit is controlled by this unit.After selecting “IR Settings” (➔ above, step 3).e, r to select “IR Settings” , thene, r to select “On” or “Off”, thenw, q to select “Yes” or “No”, thenSTB (Set Top Box) TypeSelect the service being used.After selecting “IR Settings” (➔ above, step 3).e, r to select “STB (Set Top Box)Type”, thene, r to select “Cable Box / DVR”,“Satellite Box / DVR”, “Converter Box”or “IPTV / Other STBs”, thenBrand NameSelect the set top box brand.After selecting “IR Settings” (➔ left, step 3).e, r to select “Brand Name” , thene, r, w, q to select the set top boxbrand, thenYou can also use [u] or [i] to view otherpages.–Maximum Channel digitsSelect the maximum number of channel digits to beentered in your set top box.After selecting “IR Settings” (➔ left, step 3).e, r to select “Max.CH digits”, thene, r to select “Max. 2 Digit Channel(CH xx)”, “Max. 3 Digit Channel(CH xxx)” or “Max. 4 Digit Channel(CH xxxx)”, thenThis must not be selected when “Converter Box” isselected for “STB (Set Top Box) Type” (➔ left).OK Key OperationSelect whether or not the selected channel is confirmedby pressing [OK] in accordance with your Set top box.After selecting “IR Settings” (➔ left, step 3).e, r to select “OK Key Operation”,thene, r to select “On” or “Off”, thenTestAfter selecting “IR Settings” (➔ left, step 3).e, r to select “Test”, thenConfirmation screen appears.Perform steps 8 and 9 on page 11.––•Setup Menus