Panasonic DMR-EH75VS Operating Instructions Manual

Contents

Panasonic DMR-EH75VS Operating Instructions Manual Manual pdf 26 page image

26RQT8346STEP 4 Set up to match your television and the unit’s remote controlThis setting allows you to select the type of television connected.[1] While stoppedPress [FUNCTIONS].[2] Press [3, 4] to select “Other Functions” andthen press [ENTER].[3] Press [3, 4] to select “Setup” and then press[ENTER].[4] Press [3, 4] to select “TV Screen” and thenpress [1].[5] Press [3, 4] to select “TV Type” and thenpress [ENTER].≥Aspect 4:3/Aspect 16:9:≥480p/480i:- Select “480p” if the television is compatible with progressiveoutput.- Select “480i” if the television is not compatible withprogressive output or you are unsure about televisioncompatibility.[6] Press [3, 4] to select the item and then press[ENTER].You can operate the TV through the unit’s remote control.Point the remote control at the televisionWhile pressing [Í, TV POWER] enter the codewith the numbered buttons.e.g., 0250: [0] > [2] > [5] > [0]Manufacturer and Code No.Test by turning on the television and changing channels.≥Repeat the procedure until you find the code that allows correctoperation.≥If your television brand is not listed or if the code listed for yourtelevision does not allow control of your television, this remotecontrol is not compatible with your television.Change the remote control code on the main unit and the remotecontrol (the two must match) if you place other Panasonic productsclose together.Use “1”, the factory set code, under normal circumstances.After performing steps 1 to 3 (l left)[4] Press [3, 4] to select “Setup” and then press[1].[5] Press [3, 4] to select “Remote Control Code”and then press [ENTER].[6] Press [3, 4] to select the code (Set Code 1,Set Code 2, or Set Code 3) and then press[ENTER].≥The code on the unit has been set.[7] While pressing [ENTER], press and hold thenumbered button ([1], [2] or [3]) for more than2 seconds.≥The code on the remote control has been set.[8] Press [ENTER].∫ When the following indicator appears on theunit’s display and you are unable to operate theunitPress and hold [ENTER] and the indicated number button at thesame time for more than 2 seconds.To return to the previous screenPress [RETURN].To exit the screenPress [RETURN] several times.Selecting television type4:3 standard aspect television 16:9 widescreen televisionWhen connected to a 4:3 standard aspect televisionTo change how a DVD-Video or DVD-RAM widescreen picture isshown on a 4:3 standard aspect televisionl 77, “4:3 TV Settings for DVD-Video” or “4:3 TV Settings forDVD-RAM”DVD/VHSTVGUIDEENTERFUNCTIONSVOLUMECHCHTV/VIDEOPOWERPOWERPAUSESTOPSLOW/SEARCH321649870 INPUTSELECTCM SKIPREC MODERETURNSUB MENUSCHEDULEDIRECTNAVIGATORDISPLAYAUDIOREC STATUSA BVCR Plus+DELETESKIP/ INDEXTIME SLIP / JET REWPLAYRESETRESETCANCELTRACKING/V-LOCK/PAGEDRIVESELECTTRACKING/V-LOCK/PAGE5InfoCREATECHAPTERENTERFUNCTIONSVOLUMECHTV/VIDEOPOWER321649870RETURN53,4,2,1ENTERFUNCTIONSTV operationbuttonsRETURNREW FFTVGUIDERECTV GUIDE¥NumberedbuttonsSetupSetupDiscVideoAudioDisplayChannelTV ScreenTV TypeAspect 4:3 & 480iAspect 4:3 & 480pAspect 16:9 & 480pAspect 16:9 & 480iENTER4:3 TV16:9 Aspect (Widescreen TV)VHS4:3 16:9Television operationPanasonicNationalQUASAR0250/0051 PHILIPS (RC-5) 0054RCA 0047SAMSUNG 0060/0587/0702FISHER 0154 SANYO 0154GE 0047 SHARP 0165/0093GOLDSTAR 0178/0457/0317 SONY 0000HITACHI 0145 SYLVANIA 0054JVC 0053 THOMSON 0047LG 0178/0457/0317 TOSHIBA 0156MAGNAVOX 0054 ZENITH 0017MITSUBISHI 0150When other Panasonic products respondto this remote controlDiscSetup Remote Control CodePress “±” and “ENTER” togetherfor more than 2 seconds on the remote.ChannelSetupDiscVideoThe unit’s remote control code