Panasonic DMR-EH75VS Operating Instructions Manual

Contents

Panasonic DMR-EH75VS Operating Instructions Manual Manual pdf 80 page image

80RQT8346Channel/Clock settings when TV Guide On Screen ® system is not usedRefer to the control reference on page 74.You can use the preset captions, or manually enter new onesyourself. The captions you enter are displayed when the channel isdisplayed and in the Direct Navigator screen.[1] While stoppedPress [FUNCTIONS].[2] Press [3, 4] to select “Other Functions” andthen press [ENTER].[3] Press [3, 4] to select “Setup” and then press[ENTER].[4] Press [3, 4] to select “Channel” and thenpress [1].After performing steps 1 to 4 (l above)[5] Press [3, 4] to select “Preset ChannelCaptions” and then press [ENTER].[6] Press [3, 4] to select the caption and thenpress [1].You can choose from the following captions.ABC, PBS, CBS, CNN, FOX, ESPN, NBC, HBO, A&E, AMC,FAM, MAX, MTV, SHOW, TBS, USA, TNT, CBC, UPN, CTV,WB, TSN, DSC, GLOB≥When selecting the caption, press and hold [3, 4] to scroll upand down the screen.[7] Press [3, 4] to select the channelcorresponding to the caption and then press[2].≥Channels are only displayed if they contain a station and ifcaptions have not been added manually.≥To delete the channel number, press [¢, CANCEL].Repeat steps 6 and 7 to enter other channels.[8] Press [ENTER].After performing steps 1 to 4 (l left)[5] Press [3, 4] to select “Manual ChannelCaptions” and then press [ENTER].[6] Press [3, 4] to select the channel and thenpress [1].≥Channels are only displayed if they contain a station and ifpreset captions have not been added.[7] Press [3, 4] to select the first character andthen press [1].≥You can choose from the following characters:A–Z, 0–9, -, &, !, /, (space)≥To delete the caption, press [¢, CANCEL].≥Repeat this step to enter the other characters.[8] Press [2, 1] to return to the “ChannelNumber” column.Repeat steps 6 to 8 to enter other channels.[9] Press [ENTER].Set these guide channels so you can use the VCR Plusiprogramming number for timer recording. Before setting up, refer toa TV magazine for lists containing information channels, stationnames, and guide channels.After performing steps 1 to 4 (l left)[5] Press [3, 4] to select “VCR Plusr Ch. Setting”and press [ENTER].[6] Press [3, 4] to select the guide channel youwant to set and press [1].When selecting the guide channel, press and hold [3, 4] toscroll the screen up and down.[7] Press [3, 4] to select the channelcorresponding to the guide channel and press[2].To delete a number, press [¢, CANCEL].Repeat steps 6 and 7 to enter other channels.[8] Press [ENTER].To return to the previous screenPress [RETURN].To exit the screenPress [RETURN] several times.Channel captions1 Preset Channel CaptionsSet Channels AutomaticallyChannel CaptionsPreset Channel CaptionsManual Channel CaptionsSetupSetupDiscVideoAudioDisplayTV ScreenVHSChannelTV Guide SettingsCableTVSignal Source (RF IN)VCR Plusr Ch. SettingSetupDiscSetupVideoAudioDisplayTV ScreenVHSChannelPreset Channel CaptionsCaption Channel Number------GLOBABC------PBSCBSENTER1 Manual Channel CaptionsVCR Plusr Channel SettingSetupDiscSetupVideoAudioDisplayTV ScreenVHSChannelManual Channel CaptionsCaptionChannel NumberAAAA6101223------------8 ----ENTERSetupDiscSetupVideoAudioDisplayTV ScreenVHSChannelVCR PlusiCh. SettingsCable ChannelGuide Channel---125123---------ENTER