Panasonic DMR-EH75VS Operating Instructions Manual

Contents

Panasonic DMR-EH75VS Operating Instructions Manual Manual pdf 68 page image

68RQT8346Recording from a video cassette recordere.g.: Connecting other video equipment to the IN2 or DV inputterminalsYou can also connect to the IN1or IN3 input terminals on therear.≥Turn off the unit and other video equipment before connecting.If the audio output of the other equipment is monauralConnect to L/MONO on the IN2 input terminals at the front.¢ The S-VIDEO terminal achieves a more vivid picture than theVIDEO terminal.When recording from the unit’s DV terminalSelect the type of audio recording from “Select Audio Channel forDV Input” in the Setup menu (l 76).When recording from DV equipment (e.g., digital video camcorder),you can record audio/video recordings from DV tape only.When copying 16:9 aspect titles:≥If copying to the [HDD] [RAM]:Set “Recording for High-Speed Copying” to “Off” and you can copyin 16:9 aspect titles.≥If copying to [-R] [-RW‹V›] [+R] [+RW]:Regardless of the “Recording for High-Speed Copying” settings,the video will record in 4:3 aspect titles¢.¢ You can change the screen size by adjusting the screen mode onthe television.Note≥If it becomes time for a scheduled recording to start while copying,the recording will start and the copying will stop.[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW] [VHS]Preparation≥Connect a video cassette recorder to this unit’s input terminals.≥Press [DRIVE SELECT] to select the recording drive (HDD, DVD orVHS).≥Press [REC MODE] to select the recording mode.Note≥When recording using this unit’s input terminals, only the soundreceived at the time of recording will be recorded. As long as thesecondary audio that is recorded on the video cassette is notoutput on the unit in play, it is not recorded.[1] While stoppedPress [INPUT SELECT] to select the inputchannel for the equipment you have connected.e.g., If you have connected to IN2 input terminals, select “IN2”.[HDD] [RAM] [-R] [-RW‹V›] [+R] [+RW][VHS]To skip unwanted partsPress [;, PAUSE] to pause recording. (Press again to restartrecording.)To stop recordingPress [∫, STOP].≥Using Flexible Recording (l 30), you can save the content of avideo cassette (approx. 1 to 8 hours) to a 4.7 GB disc with the bestpossible quality of recording without wasting disc space.DVD/VHSTVGUIDEENTERFUNCTIONSVOLUMECHCHTV/VIDEOPOWERPOWERPAUSESTOPSLOW/SEARCH321649870 INPUTSELECTCM SKIPREC MODERETURNSUB MENUSCHEDULEDIRECTNAVIGATORDISPLAYAUDIOREC STATUSA BVCR Plus+DELETESKIP/ INDEXTIME SLIP / JET REWPLAYRESETRESETCANCELTRACKING/V-LOCK/PAGEDRIVESELECTTRACKING/V-LOCK/PAGE5InfoCREATECHAPTERFUNCTIONSPAUSESTOPINPUTSELECTREC MODERECPLAYDRIVESELECTENTER3,4,2,1ENTER1∫DRIVE SELECT;REC MODE¥INPUT SELECTFUNCTIONSREW FFThis unitDV cable(IEEE 1394, 4-pin)S Videocable¢Audio/VideocableYellow White RedOther video equipmentConnect to Audio/Video output terminals.orManual recording[2] Start play on the other equipment.[3] When you want to start recordingPress [¥, REC].Recording starts.[2] Press [1, PLAY].≥Start playing the video cassette and find the recording startpoint.[3] Press [;, PAUSE], then press [¥, REC].≥Put the unit in recording standby mode.[4] Start play on the external device.[5] Press [;, PAUSE] at the point where youwant to start recording.Almost all videos and DVD software on sale have beentreated to prevent illegal copying. Any software that hasbeen so treated cannot be recorded using this unit.