11RQT88581 Cassette eject button (➡ 12)2 Disc tray open/close button (➡ 12, 32)3 Start recording button (➡ 22)4 Stop button (➡ 22, 33, 40)5 Play/x1.3 button (➡ 32, 40)6 Standby/on switch (Í/I) (➡ 18)Press to switch the unit from on to standby mode or vice versa. Instandby mode, the unit is still consuming a small amount ofpower.7 AV2 input terminals (➡ 54)8 DVD/VHS drive indicator (➡ 22, 32, 40)≥Lights when the DVD or VHS drive is selected.9 DRIVE SELECT button (➡ 22, 32, 40)≥Drive changes each time you press [DRIVE SELECT].: Channel Select button (➡ 21, 22); DV IN terminal (for a digital video camcorder) (➡ 54)< One Touch Copying operation button≥From VHS to DVD (➡ 49)≥From DVD to VHS (➡ 51)Common to DVD/VHS[A] Recording mode indicator (➡ 22, 23)[B] Main display≥Current time≥Disc recording and play counter≥VHS recording and play counter≥Miscellaneous messages, etc.[C] Copying indicator[D] Digital broadcast indicatorLights when the unit is receiving digital broadcast or TV Guidedata.VHS1 Timer recording indicator (F) (➡ 26)On:When a timer recording programme is registered and arecordable video cassette is inserted.Flashes:When the unit cannot record a timer recording programme (e.g.,there is no video cassette, etc.).2 Tape indicator3 Tape operation statusDVD1 Timer recording indicator (F) (➡ 26)On:When a timer recording programme is registered and arecordable disc is inserted.Flashes:When the unit cannot record a timer recording programme (e.g.,there is no disc, etc.).2 Disc operation status3 Disc indicatorMain unitS VIDEOIN 2 VIDEO /MONO AUDIO RLS VIDEO VIDEO /MONO AUDIO RLAV2 INDRIVE SELECT RECCHCHOPEN/CLOSEEJECTCOPYINGCOPYINGCOPYINGCOPYING61 2 43 57 8 9 : ; <Opening the front panelPress down on thepart with your finger.Remote Controlsignal sensorCassettecompartmentThe unit’s displayDisc trayThe unit’s displayDCOPY[A] [D][C][B] Control reference guide