Panasonic DMR-EZ47V Operating Instructions Manual

Also see for Diga DMR-EZ47V: Operating instructions

Contents

69RQT8858You can delete analogue channels and set the analogue channeldetails.After performing steps 1–4 (➡ 67)5 Press [3, 4] to select “Settings forAnalogue Services ” and press [OK].6 While “Manual Tuning” is highlightedPress [OK].To delete a programme positionPress [3, 4, 2, 1] to select a programme position and press the“Red” button.∫ To change the tuning settings for individualprogramme position7 Press [3, 4, 2, 1]to select aprogramme positionand press [OK].Press [3, 4] to select an item and press [1].Change the setting to match the equipment you are connecting with.1 While stoppedPress [FUNCTION MENU].2 Press [3, 4] to select “To Others”and press [OK].3 Press [3, 4] to select “Setup” andpress [OK].4 Press [3, 4] to select “Connection”and press [1].5 Press [3, 4] to select “TV System”and press [OK].6 Press [3, 4] to select the TV systemand press [OK].≥PAL (factory preset)–Select when connecting to a PAL or Multi-systemtelevision. Titles recorded using NTSC are played as PAL60.–Select to record television programmes and PAL input fromother equipment.≥NTSC–Select when connecting to a NTSC television. Televisionprogrammes cannot be recorded properly.–Select to record NTSC input from other equipment.7 Press [2, 1] to select “Yes” andpress [OK].To return to the previous screenPress [RETURN].To exit the screenPress [EXIT].∫ To change the setting all at once (PAL!#NTSC)While stopped, keep pressing [∫] and [< OPEN/CLOSE] on themain unit simultaneously for 5 or more seconds.[Note]≥This unit cannot record NTSC signals to discs that already havePAL signal recordings.≥If “NTSC” has been selected, the TV Guide system cannot beused.Analogue Manual TuningPos Programme position in the table(You cannot change the programme position.)Name To enter or change the name of a TV stationPress [3, 4, 2, 1] to enter station name andpress [OK].If the station name needs a blank space, selectthe blank between “Z” and “¢”.Channel To enter newly available TV stations or changethe channel number of an already tuned TVstationPress [3, 4] or the numbered buttons to enterthe channel number of the desired TV station.Wait a few moments until the desired TV stationhas been tuned.After the desired TV station is tuned, press [OK].Fine Tuning To obtain the best tuning conditionPress [3, 4] to adjust the best tuning conditionand press [OK].≥Press [1] to return to “Auto”.Mono To select the type of sound to be recordedPress [3, 4] to select “On” if the stereo sound isdistorted due to inferior reception conditions, or ifyou want to record the normal (mono) soundduring a stereo or bilingual broadcast, and press[OK].Manual TuningPos Name Ch Pos Name ChDelete1 ARD 42 ZDF 23 N3 54 HR3 85 BR3 1067891011121314151617181920OK RETURNSELECTPosNameChannelFine TuningMono14AutoRETURN : leaveManualTuning ARDOffRETURNSELECTTV SystemSetup TV SystemPALNTSCDiscPictureSoundDisplayTuningConnectionOthersVHS OK RETURNSELECTChanging the unit’s settings