Panasonic DMR-EZ47V Operating Instructions Manual

Also see for Diga DMR-EZ47V: Operating instructions

Contents

67RQT88581 While stoppedPress [FUNCTION MENU].2 Press [3, 4] to select “To Others”and press [OK].3 Press [3, 4] to select “Setup” andpress [OK].4 Press [3, 4] to select “Tuning” andpress [1].You can create four groups of channels for making viewing andrecording easier. Editing these groups does not affect the channelsetting itself.≥Timer recording may not work correctly if you edit the groupsduring timer recording standby.After performing steps 1–45 Press [3, 4] to select “EditFavourites” and press [OK].6 Press the “Green” button to select thegroup.∫ To add channels to a groupAfter performing steps 1–61 Press [3, 4] to select the channel in the “AllServices” column and press the “Yellow”button.≥Repeat this step to add other channels.≥Press the “Blue” button to add all the available channels to thegroup. (Only when no channels have been added to the group.)2 Press [OK] to save the group.∫ To change the order of channels of a groupAfter performing steps 1–61 Press [1]§ .2 Press [3, 4] to select the channel in the“Favourite” column to move and press the“Green” button.3 Press [3, 4] to select the new position of thechannel and press the “Green” button.≥Repeat the steps 2 – 3 to move other channels.4 Press [OK] to save the group.∫ To delete channels on a groupAfter performing steps 1–61 Press [1]§ .2 Press [3, 4] to select the channel in the“Favourite” column and press the “Yellow”button.≥Repeat this step to delete other channels.≥Press the “Blue” button to delete all the channels from thegroup.3 Press [OK] to save the group.Deleting a channel from a group does not affect the channelitself. You can still select the channel from the “All Services”group.∫ To change the name of a group in the“Favourite” columnAfter performing steps 1–61 Press [1]§ .2 Press the “Red” button.(➡ 57, Entering text)§ When the station name of the “All Services” column is highlightedTo browse through the listPress [W X CH].To exit the screenPress [EXIT].You can restart auto channel setting for terrestrial digital andanalogue channels if set up (➡ 18) fails for some reason.However, if you perform “Auto-Setup Restart”, the order of analoguechannels will change.After performing steps 1–45 Press [3, 4] to select “Auto-SetupRestart” and press [OK].The confirmation screen appears.6 Press [2, 1] to select “Yes” andpress [OK].You can also use the following method to restart Auto-Setup.When the unit is on and stopped,Press and hold [X CH] and [CH W] on the main unit until theAuto-Setup screen appears.All the settings except for the ratings level, ratings password andclock settings return to the factory preset. The timer recordingprogrammes are also cancelled.To return to the previous screenPress [RETURN].To exit the screenPress [EXIT].List of TV Reception ChannelsTuningEdit FavouritesSetupDiscPictureSoundDisplayConnectionTuningEdit FavouritesAuto-Setup RestartSettings for Digital ServicesOthersVHSOK RETURNTABSELECTSettings for Analogue ServicesEdit FavouritesRETURNSELECTFavourite Select Add AllAddAll Services2A ABC20A ABC HDTVFavourites 1Page -Page +Auto-Setup RestartTunerSystemChannelCoverage VHF UHF CATVPAL–B AustraliaAnalogue 0–12 28–69 45 MHz to470 MHzDVB–T AustraliaDigital 6–12 27–69 –Changing the unit’s settings